Related Manuals for Frizzlife SK99
Summary of Contents for Frizzlife SK99
- Page 1 OWNER'S MANUAL Model: SK99 Certified by IAPMO R&T according to NSF/ANSI 42 & 53 for Material Safety, Structural Integrity, Chlorine, Lead, Particulate Class I, Cyst and VOC remove.
- Page 2 WARNING: Please read the manual carefully before proceeding with installation Thank you for purchasing the Frizzlife 3-Stage Under Sink Water Filtration System. When maintained properly, this unit will provide you with years of service. The system conforms to NSF/ANSI 42&53 for the specific performance claims verified and substantiated by test data.
-
Page 3: Before Installation
Please take the system and all the components out of the box. Inspect the system carefully, make sure nothing is damaged during shipping. If any part is cracked or broken, please do not proceed with the installation and contact FRIZZLIFE for an exchange or diagnosis. - Page 4 Model: SK99 INSTALLATION OF THE FILTER SYSTEM Water pressure regulator IF YOUR VALVE IS 1/2” IF ANGLE VALVE OUTLET IS 3/8” IF ANGLE VALVE OUTLET IS 1/2” 3/8” Comp (9/16” thread) 1/2” thread...
- Page 5 Model: SK99 STEP 1: connect one part of the adaptor to the angle valve STEP 2: connect another part of the adaptor to the outlet hose STEP 1: INSTALL THE SYSTEM ONTO A WOODEN PLATE 1. Set the sticker provided in the package on the plate to mark the spots for two screws.
-
Page 6: Cartridge Replacement
Model: SK99 STEP 4: CONNECT THE WATER SUPPLY (COLD WATER ONLY) Shut off the water supply Remove the existing water hose Connect the inlet hose to angle stop valve Connect the outlet hose to Connection complete Turn on the water supply... -
Page 7: Performance Data
Model: SK99 Shut off the water supply Turn the housing counter Use the wrench to srew off the clockwise， remove the housing bottom cap Take out the inside filter Replace with a new filter cartridge cartridge and screw back in... -
Page 8: Limited Warranty
1. Frizzlife is not liable for anything that we deem as abuse of the units, including but not limited to, misuse of product outside of intended use, equipment modifications, unauthorized repairs, improper installation, damage from freezing, hot water, fire or other acts of God outside of Frizzlife control. - Page 9 There are no other warranties which extend beyond what is described above. To receive warranty service, please contact Frizzlife at support@frizzlife.com 150% Extended Warranty 1. Email us your order ID and full name at support@frizzlife.com 2. Scan the QR code below to register...
Need help?
Do you have a question about the SK99 and is the answer not in the manual?
Questions and answers
The water is not coming out
Water may not be coming out of the Frizzlife SK99 due to one or more of the following reasons:
1. A broken cap: A user reported that one of the caps holding the filter broke randomly, which caused a leak and may disrupt water flow.
2. Incorrect installation: If the system is not properly mounted or the hoses are not correctly connected, water flow may be blocked.
3. Water pressure regulator issues: If the water pressure regulator is not properly attached or the arrow is not set upwards, it may prevent water from flowing.
4. Blocked or faulty filter: The filter cartridge may be clogged or defective, restricting water flow.
Check the installation steps, connections, and components to identify and fix the issue.
This answer is automatically generated