Troubleshooting - Samsung BN68-03092A-02 User Manual

Troubleshooting

The remote control signal type
icon of the Touch Control has
changed even though I didn't
change the setting.
The screen on the Touch
Control turns off continuously.
The arrow on the top right does
not disappear.
The touch-screen function
doesn't work.
I want to turn off the power.
24
If the remote control signal type is set to WiFi (auto)
in Settings, the icon may change from time to
time depending on the condition of network or TV
connection.
The automatic screen turn off mode operates
automatically to extend the life cycle of batteries.
The automatic screen turn off time setting can be
changed by selecting Settings, Remote Settings,
General Settings and Backlight Duration. The time
can be extended to a maximum of 3 minutes. (You
can select 1 minute, 2 minutes or 3 minutes.)
Upgraded software has been added on Samsung.
com. Access Settings and perform a software
upgrade to upgrade the software to the latest
version.
The capacitor type touch-sensor technology of the
remote does not respond to the touch of a fingermail
or stylus. Touch the screen lightly with your finger.
The corresponding function will start with a beep.
To turn off the power of or reboot the remote, slide
up and remove the cover on the back of the remote,
insert the batteries again and close the cover.