Samsung 9 Series Quick Setup Manual

Quick Setup Guide
Congratulations on the purchase of your new Samsung TV.
Read this setup guide to get your TV up and running quickly.
1-800-SAMSUNG (1-800-726-7864)
STOP
Samsung Electronics America, Inc.
85 Challenger Road Ridgefield Park, NJ 07660-2112
Please do not return this unit.
Samsung Electronics Canada Inc.
55 Standish Court Mississauga, Ontario L5R 4B2
If you have problems operating your
Call Center hours of operation: Mon-Sun, 9:00 AM -12
TV, call:
AM EST.
1-800-SAMSUNG (1-800-726-7864)
To register this product, visit: www.samsung.com/
For web support please visit:
register.
www.samsung.com/support
Step 1
: Install the Batteries into the Remote
Touch Control
1 2
Slide and open the
battery cover in
the direction of the
arrow.
Mini Remote Control
1
Turn the battery cover
counterclockwise to unlock it
and then separate the battery
cover.
2
Insert a 3V Lithium battery
with the + side facing down
into the battery cover.
3
Place the battery cover into
the remote control aligning it with the grooves and then turn the battery cover
clockwise to lock the cover.
✎
If the remote control doesn't work, check the following:
x
Is the TV power on?
x
Are the plus and minus ends of the batteries reversed?
x
Are the batteries drained?
x
Is there a power outage or is the power cord unplugged?
x
Is there a special fluorescent light or neon sign nearby?
Step 2
: Connect Power and Antenna or Cable
All manuals and user guides at all-guides.com
3
Insert the battery Slide and close the
with the Samsung battery cover in
logo facing up. the direction of the
arrow.
VHF/UHF Antenna
Connect Ant In to
Antenna Cable
(Not Supplied)
• Wall cable jack
• VHF/UHF Antenna
• Cable or Satellite box
or
Ant or Cable Out
Use a 75 ohm (round) cable.
Step 3
: Connect External Devices
Connecting an AV device (DVD/Blu-ray player, cable/satellite box
Use one of the connections below to connect
your TV to an external A/V device.
We recommend using HDMI for the highest
picture quality.
AV Adapter (Supplied)
OPEN
Step 4:
Run Plug & Play
CLOSE
When you turn on your TV for the first time, it automatically launches the Plug &
Play function. With Plug & Play, you can select the On Screen Display language, set
the clock mode, and launch the TV's channel memorizing process.
It also displays connection instructions similar to those in this guide.
To navigate while Plug & Play is running, press the Up, Down, Left or Right arrow
buttons on your remote. To make a selection, press the ENTERE button.
To skip a screen, press the
button on the remote or on the TV. To run Plug & Play, follow these steps:
1
Turn on the TV and Touch Control, and
then tap OK on your remote.
✎
It may take about one minute to establish
a wireless connection between the TV and
Touch Control using the Samsung Wireless
LAN Adapter.
2
Connect the Samsung Wireless LAN
Adapter to the TV. If you are failed, reconnect the Samsung Wireless LAN
Adapter and then try again. For connecting the Samsung Wireless LAN
Adapter, please see your Owner's Manual.
3
Using your remote control, select the language for the On Screen Display
(OSD), and then press ENTERE button.
4
Select Home Use, and then press the ENTERE button. If you select Store
Demo, the TV will reset your picture and audio settings every 30 minutes.
5
Select Antenna Source. If Antenna Source is Air, Cable or Auto, you must
select your cable system type. After selecting source, select Search; then
press the ENTERE button on your remote.
✎
Most cable systems are Standard(STD) systems, If you are not sure about
what kind of cable system you have, contact your cable company.
AV Adapter (Supplied)
Lowest Quality Connection
Audio/Video connection (480i only)
Using an Audio/Video Cable
Audio Cable (Not Supplied)
AUDIO OUT
VIDEO OUT
Video Cable (Not Supplied)
button. To turn on your TV, press the
MENU
DVD, Blu-ray player, cable box,
STB satellite receiver, VCR
Device
POWER