Samsung BN68-03092A-02 User Manual page 18

Change the code set by tapping
7
select <Send IR>.
If the external device turns on or off, select <Apply> to
register the external device.
If you can't find codeset on the list, tap <Learn> to
8
start the remote's external device registration process.
• Tap <Help> for learning guide or tap <OK> to start
learning.
You must now assign the control buttons on the
9
device's remote to corresponding buttons on the LCD
remote. To begin, tap a button on the LCD remote's
screen to which you want to assign a button from the
device's remote.
• The selected button blinks.
Press the corresponding button on the device's remote.
10
• When the button LCD remote's stops blinking, the
assignment is complete. Assign the other buttons in the
same way.
• To register the Channel, Volume and Mute buttons on
an external device, tap <VOL/CH> at the top of the
Touch Control.
Select <OK> to complete the registration.
11
18
or and then
Codeset
Send IR to device
POWER
Send IR Detail
Apply
Select a button, and enter the
device remote control button
you wish to learn within 10
seconds. Press OK to fi nish
learning.
Help OK
Navigation
VOL/CH
Learn
OK
Navigation