DIG RBC 8000 Instruction Manual page 8

2. If the current time has not been set or needs to be updated press
hour digit starts flashing.
3. To set the current hour, press
4. To set the minutes, press
the or
5. Repeat the steps to set the current date including, month, day and year. When
the date is selected and updated, the day of the week will be update at the
same time to correspond with the date.
again and the minute digit starts flashing. Press
to set the current time in minutes.
MONTH DAY YEAR
or (note AM and PM designations).
6
and the