Table of Contents
Advertisement
3. To set a desired watering run time in hours, press
number of hours.
4. If only watering duration in minutes is required, press
and the minutes will start flashing.
5. To set the desired watering duration in minutes (example of 10 minutes), press
or
to select minutes. When programming the watering duration, if you
are set to water on specific days of the week, the screen will also show the days
the timer will operate with an underline.
At this point the controller's normal programming is concluded.
Press the
button to proceed to the next step RAIN DELAY
the program or to exit.
13
or
and select the
to skip the hour digit,
or to review
Hide quick links:
Advertisement
Table of Contents
