Setting Watering Run Times (Program(S) Duration) - DIG RBC 8000 Instruction Manual

To delete a start time:
1. Press until START 1 appears.
2. Press until the start time appears that you want to delete.
3. Press until the word OFF appears.
Press the button to proceed to the next step RUN TIME
the program.
11. SETTING WATERING RUN TIMES (DURATION)
This setting determines the length of time the RBC 8000 smart timer will allow the
valve to remain open (duration is from 1 minute up to 5 hours and 59 minutes). For
example, setting watering run time to 10 minutes on certain days of the week will
program the timer to turn the water on for 10 minutes on each of the days chosen
and at every start time selected. (Note: if the timer is set to water every X hours,
the maximum duration is 59 minutes)
To set the watering run time
1. Press the
setting appears. (OFF will appear if duration is set to 0)
2. Press the
hours flashing.
:
button until the
button, and 0:00 (or the last run time programmed) appears with
icon appears and OFF or the last run time
12 12
or to review