Advertisement
Before beginning the assembly of the product,make sure all parts are present.
Compare the parts with package contents list and hardware contents list.
If any parts are missing or damaged,do not attempt to assemble the product.
Tool required for assembly (included) : Allen key and Wrench.
1
E5
E5
Step1: attach the back (A) and left side (C) to the seat (B)
as shown on the picture. Then using the Allen bolt (E1),
Allen nut L (E2) and Allen nut S (E3) as shown on the picture.
Tighten with the Allen key (E5) and wrench (E4). Make
sure you tight the side , back correct with the length of
hardware used.
2
E5
E3
E3
E3
Step 2: repeat with the right side (D) same step 1.
At last tighten all bolts again.
E5
E4
Advertisement
