Changing The Pin - Samsung SFT-202 Instruction Manual

Changing the PIN:

The factory default PIN is set to: 0000. At any time the user may change this PIN code by accessing
the "Change PIN" menu:
OFF
Channel Lock
Menu Lock
OFF
Enter new PIN:
Confirm:
Lock/Unlock Channels
Change PIN
Note: Channel Lock is only effective if
Installation/Channel Setup menus are also
locked with Menu Lock
To change the PIN code, enter in the new PIN into the New PIN box and re-enter the same PIN again
in the Verify Box to confirm.
If the two PINs are not identical, the change will be aborted and the user will be asked to either re-
enter the new PIN or press ESC to abort the PIN change. If the PIN is accepted this will now be your
new PIN.
Don't forget your PIN number!
Please write down your PIN code below and keep in a safe place.
If you have forgotten your PIN code, please call an Authorised Service Agent.
Factory PIN Code:
0 0 0 0
New PIN Code:
Please keep this section or this manual in a safe place.
15