Setting The Multi Shot - Samsung VP-MS15 Owner's Instruction Manual

Photo Mode : Setting the Capturing Options

Setting the Multi Shot

You can take a series of pictures continuously with just one press of the shutter.
1. Turn the Mode Dial to
2. Press the [POWER] button to turn on the Miniket Photo.
3. Press the [MENU] button.
N
Menu screen appears.
4. Move the joystick left / right to select <Multi Shot>.
5. Select an option by moving the joystick up / down, and then press the joystick
(OK).
Off
Disables Multi Shot and takes one photo at a time.
Enables Multi Shot and takes 3 photos in a row.
Normal
Enables Multi Shot and takes 3 photos in a row with exposure bracketing
AEB
of -0.3 EV / 0 EV / +0.3 EV
6. Press the [MENU] button to exit the menu.
N
An icon indicating the selected Multi Shot mode appears on the screen.
N
If <Off> is selected, no icon will be displayed.
[ Notes ]
✤
When you set the Multi Shot enabled, you cannot use the flash.
✤
<
Anti-Shake> is not available when you set the Multi Shot enabled.
✤
Restarting the Miniket Photo will cancel the Multi Shot setting.
✤
Regarding Multi Shot with Scene modes, refer to page 72.
✤
While the menu screen is displayed, pressing the [Record / Stop] button will exit the menu.
Photo mode.
ENGLISH
23
23
23
3
IN
23 23
2592
Photo
Multi Shot
Photo
4
Multi Shot
Photo Photo
ISO
Photo
Multi Shot Multi Shot
Move Select Exit
Off
Multi Shot
Normal
AEB
Move Select Exit
Photo
Move Move Select Select Exit Exit
OK MENU
5
Multi Shot
Move Select Exit
Photo Photo
ISO
Multi Shot Multi Shot
Photo
Off
Normal
Multi Shot
Photo
AEB
Move Select Exit
Multi Shot
Move Move Select Select Exit Exit
OK MENU
6
IN
23 23
Move Select Exit
2592
23
Move Select Exit
23
23
65 65