Setting The Iso Speed (Sensitivity) - Samsung VP-MS15 Owner's Instruction Manual

ENGLISH
Photo Mode : Setting the Capturing Options

Setting the ISO Speed (Sensitivity)

ISO Speed is the rating of a film's sensitivity to light. Though Miniket Photo doesn't use film, they
normally use the same rating system to describe the sensitivity of the Miniket's imaging sensor.
1. Turn the Mode Dial to
2. Press the [POWER] button to turn on the Miniket Photo.
3. Press the [MENU] button.
N
Menu screen appears.
4. Move the joystick left / right to select <ISO>.
5. Select an option by moving the joystick up / down, and then press the joystick
(OK).
AUTO Automatically sets the ISO according to the light brightness
The standard sensitivity rate, and therefore it is the usual shooting sensitivity rate.
100
When you use this in a dark place, you can increase the shutter speed, but it might
200
come out grainy.
When you use this in a very dark place, you can greatly increase the shutter speed,
400
but you may get a rough image due to severe graininess.
6. Press the [MENU] button to exit the menu.
N
An icon indicating the selected ISO Speed appears on the screen.
N
If <Auto> is selected, no icon will be displayed.
[ Notes ]
✤
The higher the ISO Speed number, the higher sensitivity to light. It results in brighter imaging under
darker lighting.
✤
High ISO Speed setting may result in picture noise.
✤
Regarding ISO setting in Scene modes, refer to page 72.
✤
If <Anti-Shake> is set, ISO setting will be limited.
✤
While the menu screen is displayed, pressing the [Record / Stop] button will exit the menu.
68 68
Photo mode.
23
23
3
23
IN
23 23
2592
Photo
ISO
Photo
4
ISO
Photo Photo
Photo
ISO
Move Select Exit
ISO ISO
Auto ISO ISO
AUTO
100
ISO
100
200
ISO
Move Select Exit
200
400
ISO
Photo
400
Move Move OK Select Select Exit Exit
MENU
ISO
5 Move Select Exit
Photo Photo
ISO
ISO ISO
Photo
ISO
Auto
AUTO
Photo ISO
100
ISO
100
Move Select Exit
200
ISO
200
400
ISO
ISO 400
Move Move OK Select Select MENU Exit Exit
6
23 23 IN
Move Select Exit
2592
23
Move Select Exit
23
ISO
100
23