Table of Contents
Advertisement
To add waypoints tap
enter your waypoint in the same way that you did for your destination (see page 34).
To remove a waypoint/destination, select the desired location so that it is highlighted orange and
then tap
Navigating using waypoints
When the unit calculates the route it will calculate the route from your current position to the
location at the top of the list first, it will then calculate the route from the location at the top of the
list to the location second from top and so on for the next location. The last location on the list will
always be your final destination. You can change the order of a location by selecting it so that it is
highlighted orange, then use the
have entered all your waypoints and they are in the correct order tap
the route and change to the route navigation screen.
9.3 Simulate
Before you navigate a route for real you can
simulate the route on the unit. To simulate the
route tap
, you will be asked if you would
like to change your starting point. Your current
starting point will be your current position on the
map.
Tap
to change your starting point, you
will be taken to the Search Menu screen. You can
then enter the start point just as if you had entered a destination (see page 20). Once the start
point has been entered the unit will begin calculating the route and then drive the route
automatically.
Tap
to keep your current location as the start point, the unit will begin calculating the
route and then drive the route automatically.
9.4 Route Options
The route options menu allows you to configure
the route to your preference. Tap
screen will change to the route options screen.
From here you can enable or disable a number of
options relating to how the route is calculated.
The currently selected options are shown with an
orange indicator.
Use of Motorway - When selected the unit will use motorways in the route calculation.
Use of Ferries -
Shortest Route -
Quickest Route -
Avoid Toll Roads - When selected the unit will calculate a route which does not use toll roads.
35
, you will be taken to the Search Menu screen. You can then
. The waypoint/destination will be removed from the list.
When selected the unit will use ferries in the route calculation.
When selected the unit will calculate a route which covers the shortest
distance.
When selected the unit will calculate a route which has the shortest travel
time.
Binatone Help Line: 0845 345 9677 (for UK only. Local Call rate)
keys to move it up or down in the list. Once you
the
NAVIGATION MENU
, the unit will calculate
Advertisement
Table of Contents
