Operating Your Air Purifier; Using The Controls; Resetting The Filter Indicator - Hunter ExtremeAir HPF500 Quick Start Manual

Operating Your Air Purifier
The air purifier is operated by the soft touch controls located on the front of the air
purifier. This manual covers several different models. The air purifier you have
purchased may have some or all of the features listed.

USING THE CONTROLS

On/Off: Press On/Off to turn unit on or off.
Speed: Press Speed to choose from 9 variable fan
speeds from Low to Turbo.
Timer: To use timer function, set to desired speed
and press Timer to select between 1-12 hours of
operation. Unit will turn off after specified time.
Rotate: To turn rotation on or off, press Rotate.
When rotation is turned off, air purifier will pause
in the exact position until Rotate is pressed again.
Sleep Mode: When Sleep Mode is activated by
pressing the Sleep Mode button, air purifier
accent light will shut off and operate on low
speed setting until mode is changed back to
Manual. To return to Manual Mode, press Sleep
Mode button again.
UV Mode: UV Mode removes airborne bacteria.
When UV Mode is activated by pressing the UV
Mode button, air purifier accent light will turn on.
The accent light is NOT the UVC light, only an
indicator that UV Mode is on. UVC light is
enclosed in the base of the unit to avoid exposure
or harm. Accent light cannot be turned off in UV
Mode.

RESETTING THE FILTER INDICATOR

Pre-Filter Indicator Light: Your Hunter air purifier is
®
programmed to remind you to replace the
pre-filter after 3 months, based on continuous
use (appoximately 2,160 hours). The indicator is
6
only a guide. Depending on air quality and
environmental factors, pre-filters may need to be