Replacing The Remote Control Battery - Hunter ExtremeAir HPF500 Quick Start Manual

Operating Your Air Purifier
Rotate. When rotation is turned off, air purifier will pause in the exact position until
Rotate is pressed again.
Speed: To increase Speed, press the + until desired Speed is reached. To decrease
Speed, press the - until desired Speed is reached. Speed will display on control
panel.
Timer: To increase length of timer, press the + until desired Timer is reached. To
decrease length of timer, press the - until desired Timer is reached. Timer will
display on control panel.
Accent Light: When UV Mode is activated by pressing UV Mode button, air purifier
accent light will turn on. Accent light is NOT the UVC light, only an indicator that
UV Mode is on. UVC light is enclosed in the base of the unit to avoid exposure or
harm.
Sleep Mode: To turn Sleep Mode on or off, press Sleep Mode.

REPLACING THE REMOTE CONTROL BATTERY:

1. Turn over remote control. Press tab A
toward the right and pull.
2. Pull out battery holder B and replace the
battery. Only use the specified battery type
(Lithium Button Cell Battery CR2025). the
battery must be installed with the positive
side facing up.
3. Insert battery holder B back into remote.
Note: Do not apply excessive force to battery
holder. Remove battery when not using for an
extended period of time. When disposing of
used battery, please use the correct method
of disposal.
A
B
B
8