Operating Your Air Purifier; Using The Controls; Resetting Filter Time Indicator - Hunter 10200 Owner's Manual

OPERATING YOUR AIR PURIFIER

The air purifier is operated by the manual controls located on the air purifier
top. This manual covers several different models. The air purifier you have
purchased may have some or all of the features listed.
Filter
Reset Button
HEPAtech Pre-Filter
Reset Indicator Reset Indicator
Power Knob

USING THE CONTROLS

1. Turn the air purifier on by rotating Power Knob clockwise from position (O).
2. Upon turning the air purifier on, the power indicator ring will be lit and the unit
will be in Low fan speed mode (I). Best product sound.
3. Rotating Power Knob clockwise at this point will set the air purifier into Med
fan speed mode (II).
4. Rotating Power Knob clockwise once more will set the air purifier into High
fan speed mode (III). Maximum cleaning power
5. To turn the unit off, rotate Power Knob counter-clockwise to Off mode (O).

RESETTING FILTER TIME INDICATOR

When the filter reaches to its' lifespan that needs to be replaced, the filter reset
indicator will flick. Replace your air purifier with new filter and reset the indicator
by pressing the filter reset button (5 to 10 seconds) until the filter indicator goes
out.
8