Advertisement
®
R&S
ZN-Z15x
1.1
Labels on the product
Labels on the casing inform about:
● Product and environment safety
● Identification of the product
Table 1-1: Labels regarding product and environment safety
Potential hazard
Read the product documentation to avoid product damage.
Take care when handling electrostatic sensitive devices.
Labeling in line with EN 50419 for disposal of electrical and electronic equipment after
the product has come to the end of its service life. For more information, see the prod-
uct user manual, chapter "Disposal".
1.2
Warning messages in the documentation
A warning message points out a risk or danger that you need to be aware of. The
signal word indicates the severity of the safety hazard and how likely it will occur
if you do not follow the safety precautions.
NOTICE
Potential risks of damage. Could result in damage to the supported product or to
other property.
2
Key features
A calibration unit enables the automatic calibration of several network analyzer
ports in one simple procedure. It contains calibration standards that are electroni-
cally switched by the analyzer firmware, when a calibration is performed. The
characteristic data of these standards is stored in the calibration unit, so that the
analyzer can calculate the error terms and apply the calibration without any fur-
ther input.
User Manual 1337.5963.02 ─ 04
Key features
4
Advertisement
