Switching Your Radio On For The First Time; Ac Operation; Dc (Battery) Operation; Menu Tree - Bush NE-6216 Instruction Manual

SWITCHING YOUR RADIO ON FOR THE FIRST TIME

AC Operation

1. Insert the DC power jack of AC/DC adaptor to the DC input socket
located at the rear of the radio.
2. Plug the AC/DC Adaptor to the AC mains outlet.
3. Press the STANDBY button to turn the radio on.
Remarks: If the AC Adaptor voltage is over than 6V, it will possible make the
line damage.

DC (battery) operation

1. Ensure the AC/DC adaptor is disconnected from the radio and AC mains.
2. Installed the batteries (4×1.5V UM3/AA battery) into the battery
compartment.
3. Press the STANDBY button to turn the radio on.
Remarks: To obtain the best performance in DC operation, the use of
alkaline batteries is highly recommended.
Menus:
Press and hold MENU/INFO button to enter into the "MENU". Rotate SEARCH
Control to navigate the desire option, then press SELECT button to confirm.
5
MENU Tree as below:
Mode
DAB
Menu
DAB Menu FM Menu
Full Scan Scan Setting
Manual Tune Audio Setting Stereo Allowed/Forced mono
Prune System
System
System Menu
Time
Sleep
Backlight
Factory Reset
SW version
Sleep Menu
Sleep O /10/20/30/60s/70/80/90minutes
Time Menu
Set Time/Date hh:mm/DD-MM-YYYY
Auto Update Update from Any/Update from DAB/
Update from FM/ No Update
Set 12/24 hour 12/24
Set Date Format DD-MM-YYYY/MM-DD-YYYY
Mode
FM
Menu
All station/Strong stations only
Backlight Menu
Backlight Low/ Medium/ High
6