Advertisement
Available languages
Available languages
3
Put your ingredients into the goblet.
4
Fit the lid onto the goblet and turn clockwise until it
clicks. Fit the filler cap.
5
Fit the blender to the power unit and turn clockwise
to lock in position.
Hints and Tips
When making mayonnaise, put all the ingredients,
l
except the oil, into the blender. Remove the filler
cap. Then, with the appliance running, add the oil
slowly through the hole in the lid.
Thick mixtures, e.g. pâtés and dips, may need
l
scraping down. If the mixture is difficult to process,
add more liquid.
The processing of spices is not recommended as
l
they may damage the plastic parts.
To blend dry ingredients - cut into pieces, remove
l
the filler cap, then with the appliance running,
drop the pieces down one by one. Keep your
1
2
3
4
1
5
hand over the opening. For best results empty
regularly.
Knife Blade
11
12
13
14
11
15
Follow the instructions under 'To use your food
processor'.
21
22
23
24
21
25
Hints and Tips
31
32
33
34
35
31
For coarser textures use the pulse control.
l
Cut food such as meat, bread, vegetables into
l
cubes approximately 2cm.
Biscuits should be broken into pieces and added
l
down the feed tube whilst the appliance is
running.
Take care not to over-process.
l
When making pastry use fat straight from the
2
3
4
5
6
l
fridge cut into 2cm cubes.
Dough Tool
12
13
14
15
16
Use for yeasted dough mixes.
22
23
24
Follow the instructions under 'To use your food
25
26
processor'.
32
33
34
35
36
Hints and Tips
Do not process for longer than 60 seconds.
l
Place the dry ingredients in the bowl and add the
l
liquid down the feed tube whilst the appliance
is running. Process until a smooth elastic ball of
dough is formed.
Re-knead by hand only. Re-kneading in the bowl
l
is not recommended as it may cause the processor
3
4
5
6
7
to become unstable.
Emulsifying Tool
13
14
15
16
17
Follow the instructions under 'to use your food
processor'.
23
24
25
26
27
Use for light mixtures only e.g. cream, mayonnaise.
33
34
35
36
37
Hints and Tips
Ensure the bowl and tool are clean and free from
l
grease before use.
5722000073 Iss 1 Braun Metal FP301BI.Eng_Ara B5.indd 5
5722000073 Iss 1 Braun Metal FP301BI.Eng_Ara B5.indd 5
1
2
1
2
3
3
4
11
12
11
12
13
13
14
21
22
21
22
23
23
24
31
32
31
32
33
33
34
2
6
3
7
4
8
5
9
6
10
12
16
13
17
14
18
15
19
16
20
22
26
23
27
24
28
25
29
26
30
36
37
38
39
40
32
33
34
35
36
7
8
9
10
17
18
19
20
27
28
29
30
37
38
39
40
8
9
10
18
19
20
28
29
30
38
39
40
4
5
5
6
6
7
8
7
8
9
14
15
15
16
16
17
17
18
18
19
–
To Use The Cutting Discs
1
Fit the drive shaft and bowl onto the power unit.
24
25
25
26
26
27
27
28
28
29
2
Holding by the centre grip, place the disc onto the
drive shaft with the appropriate side uppermost.
3
Fit the lid.
34
35
35
36
36
37
37
38
38
39
4
Put the food in the feed tube.
5
Switch on and push down evenly with the pusher -
never put your fingers in the feed tube.
Hints and Tips
Use fresh ingredients
l
Do not cut food too small. Fill the width of the feed
l
tube fairly full.This prevents the food from slipping
sideways during processing.
When slicing or grating: food placed upright comes
l
out shorter than food placed horizontally.
There will always be a small amount of waste on
7
8
9
10
l
the disc or in the bowl after processing.
Mini chopper/mill
17
18
19
20
a
Jar
b
Sealing ring
27
28
29
30
c
Blade assembly
1
Put the ingredients into the jar.
37
38
39
40
2
Fit the sealing ring into the blade assembly.
3
Turn the blade assembly upside down. Lower it
into the jar, blades down.
4
Screw the blade assembly onto the jar until finger
tight. Refer to the graphics on the underside of the
blade assembly as follows:
- Unlocked position
- Locked position
5
Place the mill onto the power unit, align the
on the mill with the
clockwise to lock
6
Select Maximum speed or use the pulse (P).
1
2
Hints and Tips
Baby food/purée - allow cooked food to cool down
l
to room temperature before processing in the mill.
For best results the main bowl is recommended
11
12
l
when chopping herbs.
Citrus Juicer
21
22
a
Cone
b
Sieve
31
32
To use the citrus juicer
1
Fit the drive shaft and bowl onto the power unit.
2
Fit the sieve into the bowl - ensuring the sieve
handle is locked into position directly over the bowl
handle.
3
Place the cone over the drive shaft turning until it
drops all the way down.
4
Cut the fruit in half. Then switch on and press the
fruit onto the cone.
5
10
9
10
Discs
20
19
20
29
30
30
39
40
40
(if supplied)
on the power unit and turn
.
3
4
5
6
13
14
15
16
17
23
24
25
26
27
(if supplied)
33
34
35
36
37
7
8
9
10
18
19
20
28
29
30
38
39
40
06/02/2020 08:24
06/02/2020 08:24
Advertisement
