Connecting
Your Monitor
Installing the
Monitor Driver
Base Installation
1. Connect the power cord for your monitor to the power port on the back of the monitor.
2. Connecting the signal cables.
3. If you are using a Macintosh computer, connect the cable to a Macintosh adapter, and set the
4. Turn on your computer and monitor. If your monitor displays an image, installation is complete.
Plug the power cord for the monitor into a nearby outlet.
1) Connecting to the PC.
(Connect the signal cable to the video port on your computer, video board, video card, or
graphics card.)
2) Connecting the USB cable
Connect the USB cable to the USB port on the back of your monitor/computer.
pins on your adapter(Adapter not included). A PC-compatible computer does not need an
adapter.
SyncMaster 757MB
Main > Setup > Connecting Your Monitor