Sealey SM14/C Instructions

IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS.
USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE
DAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. PLEASE KEEP INSTRUCTIONS SAFE FOR FUTURE USE.
1. SAFETY INSTRUCTIONS
1.1. ELECTRICAL SAFETY. p WARNING! It is the user’s responsibility to read, understand and comply with the following:
Electricity At Work Act 1989
Health & Safety at Work Act 1974
Important:
DO NOT
DO NOT
DO NOT
a) Connect the GREEN/YELLOW earth wire to the earth terminal ‘E’.
b) Connect the BROWN live wire to live terminal ‘L’.
c) Connect the BLUE neutral wire to the neutral terminal ‘N’.
d) After wiring, check that there are no bare wires, that all wires have been correctly connected, that the cable outer insulation
extends beyond the cable restraint and that the restraint is tight.
To re-wire, connect the brown & blue wires as indicated above. DO NOT connect the brown or blue to the earth terminal.
Cable extension reels
1.2 GENERAL SAFETY
WARNING!
3
WARNING!
p
WARNING! DO NOT
p
p
3
3
3
3
3
3
3
3
3
3
3
DO NOT
3
DO NOT
7
DO NOT
7
DO NOT
7
DO NOT
7
DO NOT
7
DO NOT
7
DO NOT
7
DO NOT
7
7
3
You must
If in any doubt about electrical safety, contact a qualified electrician.
Ensure the unit is correctly earthed via a three-pin plug.
BENCH-TOP BELT/DISC
SM14/C
SANDER
Blue
Neutra
l
REPLACEMENT FUSES MUST
BE OF THE SAME TYPE AND
RATING AS THE ORIGINAL.
Yellow & Green
Earth wire
Brown
Live
wire
Cable
restrai