Starting Cold Engine - Echo PB-255LN Operator's Manual

Hide thumbs Also See for PB-255LN:
Table of Contents

Advertisement

PB-255LN
Stored two-stroke fuel can separate. ALWAYS shake fuel container
thoroughly before each use.
Used oil and gasoline, and soiled towels are hazardous waste
materials. Disposal laws vary by locality.

Starting Cold Engine

1.
Stop Switch
Move stop switch (A) away from
the STOP position.
2.
Throttle Position Lever
Move throttle position lever (B)
midway between idle and full
throttle positions.
3.
Choke
Move choke (C) to COLD START
(
) (closed) position.
4.
Purge Bulb
Pump purge bulb (D) until fuel is
visible and flows freely in the clear
fuel tank return line.
Recoil starter: Use short pulls - only 1/2 ~ 2/3 of rope for starting. Do
not allow the rope to snap back in. Always hold the unit firmly.
5.
Recoil Starter
Place the unit on a flat, clear area.
Firmly grasp throttle handle with
left hand and rapidly pull recoil
starter handle/rope (E) until
engine fires, or maximum 5 pulls.
X7501186403
© 07/22 ECHO Incorporated
OPERATION
A
B
E
C
D
23

Advertisement

Table of Contents
loading

Table of Contents