Programme Protection - AEG OKO-LAVAMAT 88730 User Information

Programme protection

To safeguard a programme setting against unwanted changes (e.g. pro-
gramme selector turned, option buttons pressed etc., you can set the
Programme protection. This prevents your washing being damaged.
The programme protection can be set and cancelled at any time during
3
a programme.
Select programme protection:
0 1. Select the desired programme settings.
2. To start the programme, press the START/PAUSE button.
3. Keep the PREWASH and SOAKING buttons pressed simultaneously for
5 seconds. The programme progress display flashes for 5 seconds.
The programme protection function is set.
As long as the programme protection is set, you cannot make any other
3
settings. The door cannot be opened with the DOOR/LIGHT button. Also
after the washing cycle has ended, you must first cancel the pro-
gramme protection before you can open the door.
If you attempt to change the selected setting by pressing a button dur-
ing the washing cycle, the programme progress display flashes for
5 seconds.
If you attempt to change the selected setting by turning the pro-
gramme selector, the programme progress display flashes until the orig-
inal setting of the programme selector is restored. The washing cycle is
not influenced in either case.
The programme selector must be in its original setting before you can
3
cancel the programme protection.
Cancelling programme protection:
0 Keep the PREWASH and SOAKING buttons pressed simultaneously for
5 seconds. The programme progress display flashes for 5 seconds, then
it is illuminated for 5 seconds. Programme protection is cancelled.
Operating Instructions
39