Detergents And Conditioners; Which Detergent And Conditioner; How Much Detergent And Conditioner; Water Softening - AEG OKO-LAVAMAT 88730 User Information

Detergents and Conditioners

Which detergent and conditioner?

Use only detergents and conditioners which are suitable for use in au-
tomatic washing machines. Always follow the manufacturer's instruc-
tions.

How much detergent and conditioner?

The required quantity depends upon:
• the extent of soiling of the washing
• the hardness class of the mains water
• the amount of washing
Should the detergent manufacturer not specify the dosage quantity for
2
less than full loads, reduce the detergent accordingly: For a half load
reduce the quantity by 1/3. For a small load or an EASY IRON pro-
gramme reduce the quantity by 1/2.
Observe the instructions for use and dosing provided by the detergent
and conditioner manufacturer.

Water softening

For medium to high water hardness (hardness class II upwards) a water
softening agent can be used. Refer to the manufacturer's instructions.
Then always add the appropriate amount of detergent (underdosing)
for hardness class I (soft). Your local Water Authority can advise you on
the hardness of the water in your area.
Water hardness details
Hardness class
I - soft
II - medium hard
III - hard
IV - very hard
Water hardness in °dH
(German hardness scale)
0 - 7
7 - 14
14 - 21
greater than 21
Operating Instructions
Water hardness in ppm
(Parts Per Million)
to 125
125 - 250
250 - 375
greater than 375
17