Electrolux EDH804U5WB User Manual page 21

Table of Contents

Advertisement

13.2 Troubleshooting
Problem
You cannot activate the appliance.
The drum does not rotate.
The program does not start.
The appliance door does not close.
The appliance stops during operation.
The cycle time is too long or unsatisfacto‐
1)
ry drying result.
The display shows
1) After maximum 5 hours, the program ends automatically.
2) It can happen that some area remains humid when drying big items (e.g. bed sheets ).
Possible solution
Make sure that the mains plug is connec‐
ted to the mains socket.
Check fuse in fuse box (domestic installa‐
tion).
Release the rear drum locks manually
(see chapter
Press Start/Pause.
Make sure that the appliance door is
closed.
Make sure that the installation of the filter
is correct.
Make sure that the laundry is not caught
between the appliance door and the rub‐
ber seal.
Make sure that the water container is
empty. Press Start/Pause to start the pro‐
gram again.
Load is too small, increase the load or
use the Time Drying program.
Make sure that the weight of the laundry
is suitable for the duration of the pro‐
gram.
Make sure that the filter is clean.
The laundry is too wet. Spin the laundry
in the washing machine again.
Ensure that the room temperature is
higher than +5°C and lower than +35°C.
Optimal room temperature is 18°C to
25°C.
Set the Time Drying or the Extra Dry pro‐
2)
gram.
If you want to set a new program, deacti‐
.
vate and activate the appliance.
Make sure that the options are suitable
for the program.
ENGLISH
Before First Use ).
21

Advertisement

Table of Contents
loading

Table of Contents