Drawbar Position 1 1/3'(4Dh)(Drawbar Tone Selected); Vibrato Delay (4Eh); Drawbar Position 1'(4Eh)(Drawbar Tone Selected) - Casio XW-P1 Manual

:
Note1 For information about the relationship between setting values and send/receive values, see the "39.2 –64 - 0 - +63
Setting Value Table" in "VIII Setting Values and Send/Receive Values" of this document.
Receive Receipt changes the degree of pitch modulation.
7.26

Drawbar Position 1 1/3'(4DH)(Drawbar tone selected)

:
Note This message is valid only when a drawbar tone is selected for the MIDI channel.
Message Format:
n:
vv:
:
Note1 For information about the relationship between setting values and send/receive values, see the "39.5 Drawbar
Position Setting Value Table" in "VIII Setting Values and Send/Receive Values" of this document.
Send Sent when a drawbar 1 1/3' is operated.
Receive Receipt changes the drawbar 1 1/3' position.
7.27

Vibrato Delay (4EH)

Message Format:
n:
vv:
:
Note1 For information about the relationship between setting values and send/receive values, see the "39.2 –64 - 0 - +63
Setting Value Table" in "VIII Setting Values and Send/Receive Values" of this document.
Receive Receipt changes the time it takes until note vibrato starts.
7.28

Drawbar Position 1'(4EH)(Drawbar tone selected)

:
Note This message is valid only when a drawbar tone is selected for the MIDI channel.
Message Format:
n:
vv:
:
Note1 For information about the relationship between setting values and send/receive values, see the "39.5 Drawbar
Position Setting Value Table" in "VIII Setting Values and Send/Receive Values" of this document.
Send Sent when a drawbar 1' is operated.
Receive Receipt changes the drawbar 1' position.
BnH 4DH vvH
MIDI Channel Number
Value (Note1)
BnH 4EH vvH
MIDI Channel Number
Value (Note1)
BnH 4DH vvH
MIDI Channel Number
Value (Note1)
20