Vibrato Rate (4Ch); Vibrato Depth (4Dh); Vibrato Delay (4Eh); Portamento Control (54H) - Casio CT-S410 Manual

7.16

Vibrato Rate (4CH)

Message Format: BnH 4CH vvH
n: MIDI Channel Number
vv: Value (Note1)
Note1: For information about the relationship between setting values and send/receive values, see the "13.4 –64 - 0 - +63
Setting Value Table" in "IV Setting Values and Send/Receive Values" of this document.
Receive Receipt changes the rate of vibrato.
7.17

Vibrato Depth (4DH)

Message Format: BnH 4DH vvH
n: MIDI Channel Number
vv: Value (Note1)
Note1: For information about the relationship between setting values and send/receive values, see the "13.4 –64 - 0 - +63
Setting Value Table" in "IV Setting Values and Send/Receive Values" of this document.
Receive Receipt changes the depth of vibrato.
7.18

Vibrato Delay (4EH)

Message Format: BnH 4EH vvH
n: MIDI Channel Number
vv: Value (Note1)
Note1: For information about the relationship between setting values and send/receive values, see the "13.4 –64 - 0 - +63
Setting Value Table" in "IV Setting Values and Send/Receive Values" of this document.
Receive Receipt changes the delay time of vibrato.
7.19

Portamento Control (54H)

Message Format: BnH 54H vvH
n: MIDI Channel Number
vv: Source Key Number
Receive Receipt of this message first stores the Source Note Number for the next note. When the next
Note On is received, the portamento effect is applied to the note using this Source Note Number as the
pitch start point and the Note On event key number as the end point. If there already is a note being
sounded by Source Note Number at this time, the new note on is not performed and the portamento
effect is applied to the pitch of the note being sounded. That is to say that legato play is performed.
11