D-Link DCS-4622 Quick Installation Manual page 4

Speaker
1
(on back)
IR LEDs
2
(behind cover)
3 Camera Lens
4 Light Sensor
Power/Status
5
LED
6 Microphone
microSD Card
7
Slot
Camera
8
Mount
Tilt
9 Adjustment
Screw
Mounting
10
Plate
Cable
11
Channels
Power
12
Connector
13 Ethernet Jack
14 Reset Button
Onboard speaker for 2-way communication.
Provide illumination for low-light environments.
Fixed lens to record video of the surrounding area.
The light sensor measures the lighting conditions
and switches between color and infrared
accordingly.
Red: Camera is on, but not connected to the network
Green: Camera is on and is connected to the network
Flashing Green: Camera is currently streaming video
Records audio from the surrounding area.
You can insert a microSD card to save snapshots
and video to it.
Remove the camera from the camera mount by turning
the camera counter-clockwise. Lock the camera in the
camera mount by turning the camera clockwise.
Can be loosened to adjust camera angle, or
removed when separating the camera cover from
the mounting plate.
Use the holes on the mounting plate to mount the
camera to a ceiling or wall.
The camera cable can be passed through the cable
channels or the center of the camera mount when
mounting it.
Connects to an optional 12 V / 1.5 A power adapter
(not included).
RJ-45 connector for Ethernet to connect the camera
to your network.
Press and hold for 10 seconds to reset camera back
to the factory default settings.
4