Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Ergolux ET150 Series
Summary of Contents for Ergolux ET150 Series
- Page 1 ET150 SERIES STANDING DESK WITH USB PORT ELSTDUSBWWA, ELSTDUSBNWA...
-
Page 2: Table Of Contents
Safety & Warnings Components List Overview Assembly Operation Cleaning & Care Specifications Troubleshooting... -
Page 3: Safety & Warnings
SAFETY & WARNINGS Ensure to read all instructions and warnings in this user guide prior to assembly and first use. Retain this user guide for future reference. • This desk can be used by children aged 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the desk in a safe way and understand the hazards involved. -
Page 4: Components List
COMPONENTS LIST WARNING: The drawings below are for guidance only and they may differ slightly from the product and fittings received. 1 Tabletop 2 Lifting column (x2) 3 Foot (x2) 4 Hanging storage box 5 Hook (x2) 6 Power cord 7A Control box 7B 19mm ST4.2 screw (x2) 8 Adapter... - Page 5 Hardware A ST4.2 screw (x6) B Cable tie (x1 and x3 spare) C 12mm M6 screw (x4) D 30mm M6 screw (x8) E Allen key...
-
Page 6: Overview
OVERVIEW... - Page 7 Dimensions 1002 730-1210...
-
Page 8: Assembly
ASSEMBLY Step 1: Fold the hanging storage box (4) as shown below. Step 2: Turn the tabletop (1) upside down and place it on top of a cloth or mat so it does not directly touch and scratch the floor. Using the Phillips screwdriver (7C), install the hanging storage box (4) and hooks (5) onto the tabletop (1) using ST4.2 screws (A). - Page 9 Step 3: Insert the hexagonal head of the lifting columns (2) along the wiring trough on the tabletop (1). Slightly rotating it, clamp the lifting columns onto the screws on the supporting beam of the tabletop (1). Using the Allen key (E), secure each lifting column with two 12mm M6 screws (C). Note: Rotating the lifting columns will ensure both columns are level and stable when the desk is used.
- Page 10 Step 4: Using the Allen key (E), secure the feet (3) to the lifting columns (2) with four 30mm M6 screws (D) each. D (x8) E (x1)
- Page 11 Step 5: Connect the cable connected to the motor and one end of the switch cord (9) into the M1 and DC ports of the control box (7) respectively. Connect the other end of the switch cord (9) into one end of the adapter (8). Tear off the adhesive on the cable tie (B) and fix it onto the bottom of the tabletop (1).
-
Page 12: Operation
OPERATION With the power cord plugged in, switch on the power at the socket. Control box Height save USB-C port button 2 Down button USB port Height save button 4 LED display Up button Height save Height save button 3 button 1 The controller features six buttons. - Page 13 Protection • This desk is fitted with systems to prevent damage if it is overheated. • This desk has a current limiter in place if the desk is in danger of being short-circuited or if a device is plugged in that causes an overcurrent. This ensures the desk operates within its normal supported current range.
- Page 14 Anti-collision This desk features anti-collision which prevents the desk from damaging nearby objects. If the desk makes contact with an object when adjusting, the desk will automatically rebound to prevent damage. The sensitivity of the anti-collision function can be adjusted to four levels. These levels will be reflected on the LED display: Display shows Description...
-
Page 15: Cleaning & Care
CLEANING & CARE Ensure the desk is turned off and the power cord is unplugged before cleaning. Using a cloth dampened with water, wipe off the dust on the surface of the desk. Notes: • Do not allow water to drop into the electrical parts of the desk. •... -
Page 16: Troubleshooting
TROUBLESHOOTING Problem Solution The desk is not turning on. Check if all cables are well connected. The speed of the height adjustment is slower than usual. Check if the desk is overloaded. The maximum load The desk moved down without capacity is 50kg. - Page 17 NOTES...
- Page 20 Need more information? We hope that this user guide has given you the assistance needed for a simple set-up. For the most up-to-date guide for your product, as well as any additional assistance you may require, head online to help.kogan.com...
Need help?
Do you have a question about the ET150 Series and is the answer not in the manual?
Questions and answers