Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Ergolux ELSTD1MTNBA
Summary of Contents for Ergolux ELSTD1MTNBA
- Page 1 STANDING DESK ELECTRIC SINGLE MOTOR - BLACK/WHITE ELSTD1MTNBA/ELSTD1MTNWA...
-
Page 2: Safety And Warnings
SAFETY & WARNINGS Service Environment: 0–40°C Unplug the power plug before cleaning, wipe the dust on surface with a damp cloth when cleaning and be careful not to let water drops into the internal parts or loosen the connector. ... - Page 3 OVERVIEW Note: The drawings below are only for reference and maybe slightly different from the product you receive. If you are missing any parts or have any issues installing, please contact Kogan.com. Part List: Part 2 x Pedestal 1 x Column...
- Page 4 1 x Column 1 x Supporting beam 1 x Transmission rod 2 x Supporting plate 1 x Adapter 2 x Baffle 1 x Power cable 4 x Cable tie...
-
Page 5: Installation
INSTALLATION Step 1: Install pedestal (1). Connect (1), (2) and (3) together: use 5x5 wrench (C) to tighten the screws (A). Step 2: Install supporting beam (4). Loosen screws on (4) with 4x4 wrench (C). Adjust the supporting beams to suit table top dimensions. - Page 6 Install supporting beam on the column (2) and (3). Tighten screw (B) with wrench 5x5 (C). Tighten screws on supporting beam with wrench 4x4 (C). Step 3: Install transmission rod (5).
- Page 7 Install (5), (2) and (3), as in picture 1 first and then picture 2: use 2.5x2.5 wrench (D) to tighten. Step 4 Install supporting plate (6). Install (6) (2) and (3): use 5x5 wrench (C) to tighten the screws (A).
- Page 8 Step 5 Install desk top. Distance <=200mm Install desk top with screw (F): use drill to tighten. Install baffle (8). Install (8) using 2.5x2.5 wrench (D) to tighten the screws (E).
- Page 9 Step 6 Connect all cables to the adapter (7). Use cable ties (10) to secure cables to the desk. Control Panel Instruction: Press the UP button or DOWN button to raise or lower the height of desk surface.
-
Page 10: Troubleshooting
TROUBLESHOOTING Issue Steps to Resolve No response while long pressing 1. Ensure all cables are connected well. down arrow after connected with 2. Contact Kogan.com. a power supply 1. Check if overloaded. Maximum loading: 70kg. Does not elevate or elevates at low 2. - Page 11 IN THE BOX...
- Page 12 Need more information? This is a Quick Start Guide and while we hope that this has given you the assistance needed for a simple set-up, a full user guide outlining all of this product’s instructions and features can be found online at help.kogan.com...
Need help?
Do you have a question about the ELSTD1MTNBA and is the answer not in the manual?
Questions and answers