1. Manuals
  2. Brands
  3. Cybernet Manuals
  4. Industrial PC
  5. IPC-R1s
  6. User manual

Cybernet IPC-R1s User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual

Advertisement

Table of Contents
loading

Related Manuals for Cybernet IPC-R1s

Summary of Contents for Cybernet IPC-R1s

  • Page 2: Declaration Of Conformity

    IPC-R1s / IPC-E1s User Manual Declaration of Conformity This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.

  • Page 3: Weee Statement

    WEEE Statement (Waste Electrical and Electronic Equipment) The WEEE directive places an obligation on EU-based manufacturers, distributors, retailers and importers to take-back electronics products at the end of their useful life. A sister Directive, ROHS (Restriction of Hazardous Substances) compliments the WEEE Directive by banning the presence of specific hazardous substances in the products at the design phase.

  • Page 4: Safety Instructions

    Safety Instructions Always read the safety instructions carefully. Keep this equipment away from humidity. Lay this equipment on a reliable flat surface before setting it up. Confirm the voltage of the power source and adjust accordingly to 110/220V before connecting the equipment to the power inlet. Place the power cord in such a way that it cannot be stepped on.

  • Page 5: Table Of Contents

    IPC-R1s & IPC-E1s Overview ..................8 IPC-R1s Dimension ..................... 8 IPC-E1s Dimension ..................... 8 IPC-R1s & IPC-E1s Front I/O View................9 IPC-R1s & IPC-E1s Back I/O View ................15 Ignition Control ......................21 Adjusting Ignition Control Modes ................21 Ignition Control Wiring ....................24 Power Management .....................

  • Page 6: Introduction

    Ready to use Introduction Congratulations on your purchase of the IPC-R1s / IPC-E1s. We are confident the IPC- R / IPC-E Series is the premier Slim Rugged PC line on the market. With their sleek design and small form factor, these units can be quickly deployed anywhere they are needed and their easy-to-use, feature-packed interfaces offer an unparalelled user experience.

  • Page 7: Ipc R1S & Ipc E1S Specifications

    2 x USB3.0 IPC-R1s: 16x GPIO IPC-E1s: 16x Isolated DIO (8 DI, 8 DO) IPC-R1s: 19V / 6.32A Power Adapter, 120W, AC Input: 100-240V AC / 2.0-1.0A / 50-60Hz Power Input IPC-E1s: 19.5V / 9.23A Power Adapter, 180W, AC Input: 100- 240V AC 2.0-1.0A / 50-60Hz...
  • Page 8 Weight 8.4 lbs AMI Flash BIOS supports ACPI, API, DMI, Plug & Play, and System BIOS security password. BIOS System POST and BIOS setup password protection. TPM BIOS Security version 2.0 Support. 1 x Trusted Platform Module (TPM) Infineon SLB9665 FCC Class A / CE EN50155 Certifications...

  • Page 9: Ipc-R1S & Ipc-E1S Overview

    IPC-R1s & IPC-E1s Overview IPC-R1s Dimension IPC-E1s Dimension DOC ID: 16001100 Page | 8...

  • Page 10: Ipc-R1S & Ipc-E1S Front I/O View

    IPC-R1s & IPC-E1s Front I/O View Reset Tact Switch This is a hardware reset switch used to reset the system without powering off the system. Power Button The Power Button is a momentary switch with dual color LED indicators. LED Color...
  • Page 11 Press the power button to turn on the system. To force a shutdown, press and hold the power button for 4-seconds. Cfast Card Supports Type-I/II Compact Flash card. Be sure to disconnect the power source and unscrew the Cfast socket cover before installing a Cfast card. The R1S/E1S does not support hot-swapping and PnP (Plug and Play) functions.
  • Page 12 DVI-D Connector This DVI output supports up to 1920x1200 resolution. Please ensure a DVI-D cable is used when connecting to this port. DVI-I Connector The DVI-I connector supports both DVI and VGA display modes. The DVI output supports up to 1920x1200 resolution. A DVI-I to VGA adapter will need to be used in order to display VGA.
  • Page 13 Display Port DP supports up to 4096x2304 resolution at 60Hz. USB3.0 There are 4x USB3.0 connections available, which supports up to 5Gbps data rate. These USB ports are also compliant with Super Speed (SS), High Speed (HS), Full Speed (FS), and Low Speed (LS). Ethernet Port LAN1: Intel I219LM 10/100/Gigabit LAN, supports Wake on LAN, PXE boot and vPro technology.
  • Page 14 SIM Card Slots MiniPCIe Slot/SIM Slot/WLAN LED Mapping Table: Mini PCIe Mini PCIe 1 SIM 1 (CN9) Mini PCIe 2 SIM 2 (CN10) Mini PCIe 3 SIM 3 (CN11) Note: The SIM card slots do not support hot-plug functionality. Please make sure to unplug system power before inserting the SIM card(s).
  • Page 15 Audio Jacks There is 1x Microphone jack and 1x Line-out jack. Onboard Realtek ALC897 audio codec supports 5.1 channel HD audio and complies with Intel® High Definition Audio (Azalia) specifications. To utilize the audio function in Windows platform, install corresponding drivers for both Intel CM236 chipset and Realtek ALC897 codec. SSD/HDD Trays There are 2x front-accessible 2.5”...

  • Page 16: Ipc-R1S & Ipc-E1S Back I/O View

    IPC-R1s & IPC-E1s Back I/O View Power Terminal Block The system supports 6V to 36V DC power input by terminal block. Pin No. Definition Chassis Ground DOC ID: 16001100 Page | 15...
  • Page 17 External Power Button V+ External Power Button V- GPIO (IPC-R1s only) The system offers sixteen programmable I/O. If the GPIO is logic high, it indicates that the mapping SIO GPIO pin is logic high level. If the GPIO is logic low, it indicates that the mapping SIO GPIO pin is logic low level.
  • Page 18 SIO_GPI75 SIO_GPO85 SIO_GPI76 SIO_GPO86 SIO_GPI77 SIO_GPO87 ---------- ---------- ---------- ---------- Isolated DIO (IPC-E1s only) There is a 16-bit (8-bit DI, 8-bit DO) DIO connector. The DI/DIO supports NPN (Sink) and PNP (Source) mode. Each DI channel is equipped with a photocoupler for isolated protection.
  • Page 19 DIO connectors pin out: Pin No. Definition Function INPUT 0 SIO_GPI80 INPUT 1 SIO_GPI81 INPUT 2 SIO_GPI82 INPUT 3 SIO_GPI83 INPUT 4 SIO_GPI84 INPUT 5 SIO_GPI85 INPUT 6 SIO_GPI86 INPUT 7 SIO_GPI87 DI1_COM DIO1_GND OUTPUT 0 SIO_GPO70 OUTPUT 1 SIO_GPO71 OUTPUT 2 SIO_GPO72 OUTPUT 3...
  • Page 20 DOC ID: 16001100 Page | 19...
  • Page 21 Serial Ports Serial port 1 through 4 can be configured for RS-232, RS-422, or RS-485 with auto flow control communication. The default definition of COM1 and COM2 is RS-232, which can be configured in the BIOS. BIOS Setting Function RS-232 COM 1 RS-422 (5-wire) COM 2...

  • Page 22: Ignition Control

    Solid Green PoE On Ignition Control The IPC-R1s / IPC-E1s features an ignition power control for in-vehicle applications. The built-in MCU monitors the ignition signal and turns on/off the system according to pre-defined on/off delay periods. Adjusting Ignition Control Modes The system provides 16 modes for multiple power on/off delay periods that are adjustable with the SW5 DIP switch.
  • Page 23 DOC ID: 16001100 Page | 22...
  • Page 24 The delay modes are listed below: Mode Power On Delay Power Off Delay Switch Position ATX mode No Delay No Delay No Delay 5 Seconds No Delay 10 Seconds No Delay 20 Seconds 5 Seconds 30 Seconds 5 Seconds 60 Seconds 5 Seconds 90 Seconds 5 Seconds...

  • Page 25: Ignition Control Wiring

    Ignition Control Wiring To activate ignition control, you will need to provide IGN signal through the terminal blocks located on the rear IO. Please see below example. Note: • DC Power source and IGN share the same ground. • The system supports 6V to 36V wide range DC power input while in ATX/AT mode.

  • Page 26: Power Management

    Power Management Taking advantage of the power management options available on Windows OS can save you significant amounts of electricity and also provide environmental benefits.For better energy efficiency, turn off your display or set your PC to sleep mode after prolonged periods of user inactivity.
  • Page 27 Power Management through ENERGY STAR qualified monitors (Not supplied with the IPC-R1s / IPC-E1s) The power management feature allows the IPC-R1s / IPC-E1s to initiate a low-power or “Sleep” mode after a period of user inactivity. When used with an external ENERGY STAR qualified mnitor, this functionality also supports similar power management features for the display.

  • Page 28: Waking The System Up

    Waking the System Up The IPC-R1s / IPC-E1s can wake up from power saving mode in response to a command from any of the following: • the power button, • the network (Wake on LAN) • the mouse • the keyboard...

  • Page 29: Ipc-R1S / Ipc-E1S Bios Introduction

    IPC-R1s / IPC-E1s BIOS introduction The AMI BIOS provides a Setup utility program for specifying system configurations and settings. The BIOS ROM of the system stores the Setup utility. When you turn on the computer, the AMI BIOS is immediately activated. Pressing the <F2> or <DEL> key allows you to enter the Setup utility.

  • Page 30: Appendices

    Appendices DOC ID: 16001100 Page | 29...

  • Page 31: A - Isolated Dio Guide

    A - Isolated DIO Guide The E1S offers a 16-bit DIO (Isolated/Non-Isolated) 20-pin terminal block connector, a watchdog timer, and a 4-port PoE. Isolated DIO pins are fix by Hardware design that cannot change in/out direction in runtime process. DIO definition is shown below: Isolated DIO jumper setting is shown below: DOC ID: 16001100 Page | 30...
  • Page 32 PoE definition is shown below: Isolated DIO Signal Circuit: DOC ID: 16001100 Page | 31...
  • Page 33 DOC ID: 16001100 Page | 32...

  • Page 34: B - Cybernet's Recycling Program

    B - Cybernet’s Recycling Program C - Getting Help Corporate Headquarters UK & European Inquiries Cybernet Manufacturing Cybernet Europe 5 Holland #6, Groveland Business Centre Irvine, California 92618 Boundary Way Free: (888) 834-4577 Hemel Hempstead, HP2 7TE Phone: (949) 600-8000...

This manual is also suitable for:

Ipc-e1s

Table of Contents