Table of Contents
Advertisement
Using batteries
Prepare two AA batteries.
1.
Slide open the battery cover on the bottom of the AMS-44 and install the batteries.
2.
Slide the battery cover to close it.
3.
Set
to ON.
4.
Confirm that the POWER indicator is lit red.
NOTE:
• Use only one type of battery (alkaline, NiMH or lithium) at a time.
• The POWER indicator will blink when the battery charge becomes low. Replace the batteries with new
ones.
13
Advertisement
Table of Contents
Need help?
Do you have a question about the AMS-44 and is the answer not in the manual?