Maintenance And Cleaning; Symptoms And Recommended Actions - Samsung SyncMaster 192MP Owner's Manual

Troubleshooting
Check before Calling for Service
3. Not Optimum Mode
If the vertical resolution is set to 85Hz, you can still see the display but the warning message below
appears and disappears after one minute. Since the monitor does not support a vertical resolution that is
85Hz or higher, the monitor goes into " Not Supported Mode " and the screen becomes blank after one
minute.
The user must adjust the frequency within that one minute.
If the resolution is set to UXGA (1600x1200 60Hz), the same warning message as above appears and
disappears after one minute, but the display still works properly. (Down-Scaling)
4. Display Adapter Driver
Display adapter refers to the computer video card driver.
If the adapter is not properly set, you cannot adjust resolution, frequency or color and you cannot install
the monitor driver.
1. Checking Adapter Driver
Click Start
Adapter.
If "Default" or a wrong product model is indicated, it means that the adapter driver is not properly
installed. Install the adapter driver again according to the information provided by the computer or
video card manufacturers.
2. Installing Adapter Driver
1) Click Start
Adapter
that I can choose a specific driver
2) In case you have Adapter Driver Setup file on your computer:
Run Setup.exe or Install.exe, which is found in the Adapter Driver Setup file.

5. Maintenance and Cleaning

1. Maintaining the Monitor Case.
Clean with a soft cloth after disconnecting the power cord.
2. Maintaining the Flat Panel Display Screen.
Clean with a soft cloth (cotton flannel) smoothly.

6. Symptoms and Recommended Actions

Settings Control Panel
The instructions given below are for general circumstances.
For specific issues, contact the relevant computer or video card manufacturers.
Settings Control Panel
Update Driver
OK Next Next
Do not use benzene, thinner or other flammable substances, or a
wet cloth.
We recommend a Samsung cleansing agent is used to prevent
damage to the screen.
Never use acetone, benzene or thinner.
(They may cause flaws or deformation of the screen surface.)
The user will be required to pay costs and related expenses for
repair of damages caused by him/her.
Display Settings
Display
Next Display a list of the known drivers for this device so
Next Have Disk (Insert Video Card Driver diskette)
Finish.
Advanced
Settings Advanced