Water Feed - AEG ÖKO-LAVAMAT 86720 User Instructions

Installation and Connection Instructions

Water feed

A flexible pressure tubing of 1.5m length is supplied.
If a longer feed tubing is needed, a complete VDE-approved tubing set
with mounted screw connections, supplied by our customer service,
should be used exclusively.
– For washing machines without Aqua-Control, tubing sets are availa-
ble in lengths of 2.2m, 3.5m and 5m.
– For washing machines with Aqua-Control, tubing sets are available in
lengths of 2.0m, 2.9m and 3.9m.
Attention! Under no circumstances may tubing be pieced together for
the purpose of lengthening!
Sealing rings are either inserted in plastic nuts of the tubing screw con-
3
nection or contained in an accompanying packet. Do not use other
seals.
0 1. Connect the angled hose connector to the
machine.
Attention! Plastic nut at the tube coupling
may only be hand tightened.
2. Connect the straight hose connector to a water tap with an
R 3/4 (inch) thread.
Important! Only tighten the plastic nuts on the hose con-
nectors by hand.
3. By opening the water tap slowly prior to the initial opera-
tion, check whether the connection is tight.
46