Page 2
IMPORTANT: Read and understand this manual before assembling or operating this Trimmer. Improper use can cause severe injury. Keep this manual for future reference. Content: I - Parts List II - Technical Data III - Safety Instructions IV - Getting Started V - Operation VI - Cleaning, Maintenance, Storage and Guarantee.
Page 3
II. SAFETY INSTRUCTIONS While operating Trimmer WARNING: When using electric Trimmers, basic safety precautions should 1. Stay Alert - Watch what you are doing. Use common sense. always be followed to reduce the risk of personal injury. 2. Be aware of extension cord while operating Trimmer. Be careful not to trip over extension cord.
Page 4
IV. GETTING STARTED Unpacking 1. Remove Trimmer and all other items from box. Pic. A Pic. B Re-fixing the Joint sleeve with Pic. A and Pic. B(see Pic.1-Pic. 4) Pic. 1 Pic. 2 Pic. 3 Pic. 4...
Page 5
V. OPERATION Pic. 1 OPERATING YOUR TELESCOPIC TRIMMER ADJUSTMENT OF THE TELESCOPIC SHAFT The Trimmer is packed with the telescopic shaft adjusted to it shortest position. To begin with, release the shaft lock (please see page 2. Parts List - Part 6). Adjust the shaft to desired position and then re-lock.
Page 6
HOW TO OPERATE: 1. There is a large red trigger and a red safety button both located on the grey handle (Parts list on Page 2 Parts 8 & 10). Both must be depressed for the hedge trimmer to operate. 2.
Page 7
Pic. 7 Pic. 8 Pic. 9 Using the Trimmer The Trimmer is a dual-purpose tool. It is designed to trim and shape tall, hard-to-reach hedges and bushes with its extended reach and pivoting head. You can also adjust the Trimmer to trim and shape smaller hedges and shrubs near the ground without having a bend or stoop.
Page 8
VI. CLEANING, MAINTENANCE AND STORAGE GUARANTEE: WARNING: Disconnect Trimmer from power supply before cleaning or This product is designed for domestic use only and guaranteed as servicing. Severe injury or death could occur from fire, electrical shock, or such against faulty workmanship for a period of 12 months from date body contact with moving cutter blades.
Need help?
Do you have a question about the 9070 and is the answer not in the manual?
Questions and answers