Using The Lithium Ion Battery Pack; Utilización De La Batería De Iones De Litio - Samsung D365W(I) Owner's Instruction Book

Samsung digital video camcorder user manual
Hide thumbs Also See for D365W(I):
Table of Contents

Advertisement

ENGLISH
Preparation

Using the Lithium Ion Battery Pack

✤ Use SB-LSM80 or SB-LSM160 Battery Pack only.
✤ The Battery Pack may be charged a little at the time of purchase.
Charging the Lithium Ion Battery Pack
1. Turn the [Power] switch
to [Off].
Once per second
2. Attach the Battery Pack to
Twice per second
the Camcorder.
Three times per second
3. Connect the AC Power
Blinking stops and stays on 90% ~ 100%
Adapter to an AC Cord
On for a second and
and connect the AC Cord
off for a second
to a wall socket.
4. Connect the DC cable to the DC jack on the Camcorder.
The charging indicator will start to blink, showing that the Battery is
charging.
5. Press and hold the DISPLAY button while charging and
the charging status will be displayed on the LCD for 7
seconds.
I
As indicated the battery level is given as reference
data for the user, it is the approximate estimation. It
may differ from Battery capacity and temperature.
6. When the Battery is fully charged, disconnect the Battery
Pack and the AC Power Adapter from the Camcorder.
Even with the Power switched Off, the Battery Pack will
still discharge.
Charging,
Battery
Recording Times
based on Model
SB-LSM80
and Battery Type.
✤ If you close the LCD
SB-LSM160
Screen, it switches off
(Option)
and the Viewfinder
switches on automatically.
✤ The continuous recording times given in the table
to the right are approximations.
Actual recording time depends on usage.
✤ The continuous recording times in the operating instructions are measured
using a fully charged Battery Pack at 77 °F (25 °C).
✤ Even when the Power switched Off, the Battery Pack will still discharge if it
is left attached to the device.
16
16
Blinking time
Charging rate
Less than 50%
50% ~ 75%
75% ~ 90%
Error - Reset the Battery
Pack and the DC Cable
B B a a t t t t e e r r y y c c h h a a r r g g e e d d
0%
Recording time
Time
Charging
time
Viewfinder On
LCD On
Approx.
Approx.
Approx.
1hr 20min
1hr 30min
1hr 20min
Approx.
Approx.
Approx.
2hr 40min
3hr
Preparación
Utilización de la batería de iones de litio
✤ Utilice únicamente la batería B-LSM80 o SB-LSM160.
✤ Es posible que la batería esté cargada sólo parcialmente al adquirir la
videocámara.
Carga de la batería de iones de litio
1. Gire el interruptor [Power]
a [Off].
2. Conecte la batería a la
videocámara.
3. Conecte el adaptador de
CA a un cable de CA y
éste a una toma de
corriente.
4. Conecte el cable de CC al
terminal de CC de la videocámara.
El indicador de carga comenzará a parpadear, lo cual
indica que se está cargando la batería.
Battery Info
5. Cuando la batería esté totalmente cargada, desconecte
la batería y el adaptador de CA de la videocámara.
Incluso con la videocámara apagada, la batería se
50%
100%
descargará.
I El nivel de la batería indicado que se facilita al usuario
6. Cuando la batería
esté totalmente
cargada, desconecte
la batería y el
adaptador de CA de
la videocámara.
Incluso con la
3hr
videocámara
apagada, la batería se descargará.
Tiempos de carga, grabación basándose en el modelo y el tipo de batería
✤ Si cierra la pantalla LCD, se apaga y el visor se enciende automáticamente.
✤ Los tiempos de grabación continua que se facilitan en la tabla son
aproximados.
El tiempo real de grabación depende del uso de la videocámara.
✤ Los tiempos de grabación continua en las instrucciones de funcionamiento
se miden utilizando una batería totalmente cargada a 25 °C (77 °F).
✤ Incluso con la unidad apagada, la batería se descargará si se deja
conectada al dispositivo.
Frecuencia de parpadeo
Velocidad de carga
Una vez por segundo
Menos del 50%
Dos veces por segundo
50% ~ 75%
Tres veces por segundo
75% ~ 90%
Deja de parpadear y queda
90% ~ 100%
encendido
Encendido durante un segundo
Error – Reinicialice la batería
y apagado durante un segundo
y el cable de CC
son datos de referencia aproximados. Puede que
difiera de la capacidad y temperatura de la batería.
Tiempo de grabación
Batería
Tiempo de
Tiempo
carga
LCD ENCENDIDA Visor encendido
Aprox. 1 h. 20
Aprox. 1 h.
SB-LSM80
min.
20 min.
SB-LSM160
Aprox. 3 h.
Aprox. 2 h. 40
(Opcional)
min.
ESPAÑOL
Aprox. 1 h. 30
min.
Aprox. 3 h.

Advertisement

Table of Contents
loading

Table of Contents