Do you have a question about the 20600-3 Deluxe and is the answer not in the manual?
Questions and answers
Audrey Keeton
March 1, 2025
Reset prefilter indicator
1 comments:
Mr. Anderson
March 1, 2025
To reset the prefilter indicator on the HealthWay 20600-3 Deluxe, follow these steps:
1. Press and hold the PREFILTER SERVICE button for 8 seconds until the PREFILTER FUNCTIONING indicator starts flashing. 2. Press and hold the PREFILTER SERVICE button again for another 8 seconds to reset the timer. 3. After the reset, the PREFILTER FUNCTIONING indicator will resume a solid green light.
Page 1
® 20600-3 Deluxe DFS (Disinfecting Filtration System) Healthy air for all your indoor spaces Professional Air Cleaner Model No. 20600-3 U s e r M a n u a l Return your Warranty Registration Card / register your unit within 10 days of purchase.
Page 2
Color options vary depending on region / market...
This designed in USA hand-crafted air cleaner is individually tested and certified to guarantee better than HEPA performance at ultrafine particle levels. Your choice of this Healthway Air Cleaner will bring pure air and create a healthier indoor environment for you and your loved ones.
What’s in the box Wrench 1 Healthway DFS Professional Air Cleaning System Main Unit 1 Power cord (attached to main unit) 1 7-stage prefilter (inside main unit) User Manual 1 Main filter (inside main unit) Warranty Card 1 Remote 1...
Exploded View & Specifications 1. TOP COVER • Clean air comes out 365 days a year 24/7. 2. ELECTRONIC CONTROL PANEL • User friendly filter replacement & DFS indicators • Convenient 4-speed control. 3. MAIN FILTER • Better than 99.99% particle reduction at 0.3 micron. •...
Operation | Function Description fig 2 Control Panel - Buttons (fig 2) a) OFF Button - to turn unit off and return to standby mode b) ON / SPEED Button - to turn unit on or change speed setting c) MAIN FILTER SERVICE - to reset main filter timer d) PREFILTER SERVICE - to reset prefilter timer...
Page 7
Operation | Function Description Main Filter Functioning – When lit in green, main filter is functioning. – When the green indicator flashes, main filter needs a replacement. DFS function is disabled automatically and respective indicator turns off. The DFS ON/OFF button is disabled. Prefilter Functioning –...
Operation | Instructions WARNING: The appliance is not to be used by children or persons with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless supervised or they have been given instruction. Power ON / OFF 1.
Page 9
Operation | Instructions DFS Activation / Deactivation 1. When unit is under normal operation, DFS function is turned on by default. The BIOMONITOR DFS FUNCTIONING indicator is lit in green. 2. Press DFS ON/OFF button to turn such function on or off. 3.
Routine Care & Maintenance Filters need to be replaced or maintained properly to maximize the unit’s performance Maintenance schedule is based on pollution level. Following is the recommended maintenance schedule for most environments. Filters need to be replaced/cleaned more often if unit is being used in a heavily polluted environment: Prefilter - replace every 6 months High Energy Grid - clean every 6 months...
Page 11
WARNING: Proper filters must be used and loaded correctly or the purifier will not turn on. Do not force the handles. They should move freely. If not, realign the filter. For additional instructions, call Healthway Customer Service Department or your local distributor. Replacing the Main Filter fig 6 •...
Page 12
Routine Care & Maintenance ( Routine Care & Maintance continued from page 11 ) Reset respective indicators after replacing/cleaning filters Reset MAIN FILTER FUNCTIONING indicator • If main filter is replaced after the timer is up (MAIN FILTER FUNCTIONING indicator starts flashing before replacement), press MAIN FILTER SERVICE button for 8 seconds to reset (fig 10).
Further examination by a trained technician is required. Call HealthWay Customer Service or local distributor. WARNING: If all suggested steps have been taken and problems persist, contact Healthway Customer Service Department or your local distributor for further examination by a trained technician.
Healthway authorized personnel, proves to have failed in normal use due to defects in material or workmanship. The sole responsibility of Healthway under this Limited Warranty is, in its sole discretion, to either repair or replace a duly registered product (or defective part thereof) with the same or a comparable model within a reasonable period of time, subject to the fol- lowing exclusions, limitations, statutory rights, and warranty claim procedures.
Healthway shall not be liable for personal injury resulting from malfunctions, defects, misuse, improper operation or installation, or alteration of an Healthway product or any part thereof. The exclusive remedy for a breach of this Limited Warranty is the repair or replacement of the defective product.
Need help?
Do you have a question about the 20600-3 Deluxe and is the answer not in the manual?
Questions and answers
Reset prefilter indicator
To reset the prefilter indicator on the HealthWay 20600-3 Deluxe, follow these steps:
1. Press and hold the PREFILTER SERVICE button for 8 seconds until the PREFILTER FUNCTIONING indicator starts flashing.
2. Press and hold the PREFILTER SERVICE button again for another 8 seconds to reset the timer.
3. After the reset, the PREFILTER FUNCTIONING indicator will resume a solid green light.
This answer is automatically generated