Table of Contents
Advertisement
Render Standby
Power down the render unit when the GPU is idle for lower power con-
sumption.
Active LVDS
Use this to enable or disable the LVDS. The default value is [Disabled].
Set the item to [enable]. Then press <F10> to save the setting and restart
the system. Now the default value of Active LVDS is changed to ENABLE
(F9 load default is also set to ENABLE)
Change the setting from [Enable] to [Disable], and then press <F10> to
save the setting and restart the system. Likewise, the default value of Ac-
tive LVDS is changed to DISABLE (F9 load default is also set to DISABLE)
Panel Type Selection
Use this to select panel type. This item appears when you enable Active
LVDS.
The default values of Active LVDS and Panel Type Selec-
tionwill be changed only when the users manually adjust
them. They will keep at the default values no matter you clear
CMOS, use Instant Flash or press <F9>.
Onboard LAN1
This allows you to enable or disable the Onboard LAN1 feature.
Onboard LAN2
This allows you to enable or disable the Onboard LAN2 feature.
Onboard LAN3
This allows you to enable or disable the Onboard LAN3 feature.
Onboard HD Audio
Select [Enabled] or [Disabled] for the onboard HD Audio feature.
Deep Sleep
Mobile platforms support Deep S4/S5 in DC only and desktop platforms
support Deep S4/S5 in AC only. The default value is [Disabled].
Restore on AC/Power Loss
Select the power state after a power failure. If [Power Off] is selected, the
power will remain off when the power recovers. If [Power On] is selected,
the system will start to boot up when the power recovers.
33
Advertisement
Table of Contents
