Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for HRS E1 ISOLATION BASE
Summary of Contents for HRS E1 ISOLATION BASE
- Page 1 E1 ISOLATION BASE A Low Noise Floor Is Fundamental...
- Page 2 Helix significantly reduce the harmful effects of airborne vibration and structural resonance on your components. Please read this manual completely prior to use of your E1 Isolation Base for setup and product care instructions. Proper care of your E1 Isolation Base will ensure optimum performance and an aesthetically pleasing appearance.
-
Page 3: Safety Instructions
SF footer or is the specific component model number for LF footers. If the SF or LF footers of the E1 Isolation Base are overloaded, the HRS isolators will hit a protective stop and significantly reduce the product performance. If your... - Page 4 If there is no compliance at one or more corners then the load range should be changed by HRS to the proper load range. HRS can modify the E1 Isolation Base load range as many times as needed for a fraction of the original purchase price.
- Page 5 Isolation Bases built for a specific component model have already been set up for that specific component weight distribution. If the component is centered on the custom isolation base and the HRS logo is in the right front corner then the loading of a custom base model is correct.
-
Page 6: Specifications
Specifications The following specifications are based on your E1 Isolation Base part number which is marked on the outside of the original factory box. The part number is composed of the following information sequence: Series - Model Number – Foot Type (Load Range) - Base Color The load range can also be identified by the color of the sticker located on the back of the isolation base frame. - Page 7 Standard Model E1 Isolation Base Size Physical Characteristics and Load Ranges (For Custom Model Information Please Contact HRS) Model: Dimensions: Base Weight: E1 -1719 19 x 17 x 3 inches 26 lb (48.3 x 43.2 x 7.6 cm) 11.8 kg...
-
Page 8: Care And Maintenance
Care and Maintenance The E1 Isolation Base is a very low maintenance item that will provide many years of trouble-free performance by applying these basic care instructions. Clean the surfaces of the E1 using a lint-free soft (non-abrasive) cloth. If needed use a cloth lightly damped with water. -
Page 9: Limited Warranty
Limited Warranty Harmonic Resolution Systems warrants the product designated herein to be free of manufacturing defects in material and workmanship subject to the conditions herein set forth, for a period of 90 days from the date of purchase by the original purchaser. If the purchaser registers the unit with Harmonic Resolution Systems by mailing in the warranty card, together with a copy of the bill of sale, within 14 days of the date of purchase, said purchaser would be registered for an extended service contract. - Page 10 During the warranty period, Harmonic Resolution Systems will repair or replace any defective components free of charge. A Return Authorization Number (RA Number) obtained directly from Harmonic Resolution Systems is required before any product is returned to Harmonic Resolution Systems for any reason. This number must be visible on the exterior of the shipping container(s) for Harmonic Resolution Systems to accept the return.
- Page 11 (MADE IN USA) All Harmonic Resolution Systems Inc. products are 100% Made In The United States of America by skilled craftsmen using only the finest materials and our personal dedication to the highest workmanship standards. ARMONIC ESOLUTION YSTEMS 2495 Main Street, Suite 227 Buffalo, NY 14214 Telephone: 716-873-1437 Web: www.AVisolation.com...
Need help?
Do you have a question about the E1 ISOLATION BASE and is the answer not in the manual?
Questions and answers