Summary of Contents for Furniture Values International aspenhone I356-6050-BRB
Page 1
aspenhome ASSEMBLY INSTRUCTIONS ITEM NO: I356-6050-BRB Extendable Dining Table Thank you for purchasing this quality product. Be sure to check all packing material carefully for small parts that may come loose inside the carton during shipment. TOOLS REQUIRED (NOT PROVIDED) PHILLIPS SCREWDRIVER HARDWARE LIST: Quantity...
Page 2
aspenhome ASSEMBLY INSTRUCTIONS ITEM NO: I356-6050-BRB Extendable Dining Table For OPTION 1: STEP 1: Lay the table top face down on a soft surface. Attach the legs to table top by using 8 hexagon nuts(A), spring washers(B) and flat washers(C). Use the spanner (D provided to tighten all Turn the assembled table to the upright position.
Page 3
aspenhome ASSEMBLY INSTRUCTIONS ITEM NO: I356-6050-BRB Extendable Dining Table STEP 3: Unfold the butterfly leaf as shown right, Caution: Apron be careful do not damage the hinges and wood Lift table leaf here surfaces of the leaves. Caution: Careful your hands don't be Leaf nipped, when flip up or down the leaves and aprons.
aspenhome ASSEMBLY INSTRUCTIONS ITEM NO: I356-6640S-BRB Dining Side Chair w/ Uph Seat (2/Ctn) Thank you for purchasing this quality product. Be sure to check all packing material carefully for small parts that may come loose inside the carton during shipment. TOOLS REQUIRED (NOT PROVIDED) PHILLIPS SCREWDRIVER HARDWARE LIST:...
Page 5
aspenhome ASSEMBLY INSTRUCTIONS STEP 1: Attach the chair seat to chair back by using 4 bolts(A), 2 bolts(C), 6 lock washers(D), 6 flat washers(E) with a (F), spanner Do not completely tighten bolts. Chair Seat STEP 2: Attach the left front leg and right Chair Back front leg to chair seat by using 4 bolts(B), lock washers(D), flat washers(E),...