Advertisement
Quick Links
Advertisement
Related Manuals for Specac GS20600
Summary of Contents for Specac GS20600
- Page 1 Solids Cell Holders User Manual 2I-20600,20610 Issue 3...
- Page 3 Solids Cell Holders User Manual 2I-20600,20610 Issue 3...
- Page 4 .............. 5 OLIDS OLDERS 4. L …………… ... ……………10 EGEND OF UBBLE UMBERS © April 2016 Specac Ltd. All rights reserved. Brilliant Spectroscopy™ is a trademark of Specac Ltd. Other product names mentioned herein may be trademarks of their respective owners.
- Page 5 Far UV through to the Far IR. A solid sample is prepared and is fitted into either the P/N GS20600 or P/N GS20610 Solids Cell Holder. In turn the Solids Cell Holder with its sample is then fitted into a particular Mount Holder for installation into the spectrometer sample compartment for spectral measurement.
- Page 6 User Manual 2. Checklist of Contents Check that the following items have been supplied: For Solids Cell Holder P/N GS20600. Body Pressure Plate Clamp Ring Clamp Ring Key For Solids Cell Holder P/N GS20610. Outer threaded cell body...
- Page 7 3. The Solids Cell Holders Solids Cell Holder GS20600 The body of the Solids Cell Holder P/N GS20600 has a fixed size aperture of 10mm diameter, with an overall outer diameter of 41mm. Solid samples from 12mm to 28mm diameter and up to 3mm thick can be inserted into the body to be analysed by transmission spectroscopy.
- Page 8 User Manual Loading a Solid Sample into the GS20600 Solids Cell Holder Solid sample placed in Solids Cell Holder body Fig. 3 Exploded view of Solids Cell Holder GS20600 1. Remove the screw retaining ring (1) (turn anticlockwise) from the Solids Cell Holder body (2) by means of the square key provided.
- Page 9 Solids Cell Holder holder, taking care not to over-tighten in case of damaging the sample. The Solids Cell Holder P/N GS20600 containing a solid sample is now ready for use. Removal or replacement of a solid sample in the Solids Cell Holder is the reverse procedure of steps 1 to 4.
- Page 10 User Manual Recessed face Stepped circumference face Fig. 5 Location plate (5) faces The three different location plates (5) for the pairs of pressure plates (5 and 6) have apertures of 10mm, 15mm and 20mm diameter. The corresponding recess diameters for 10mm and 15mm aperture location plates (5) are 17mm and 22mm diameter respectively, both with a depth of recess of 1mm.
- Page 11 Cell Holder is the reverse procedure of steps 5 to 7. Thermocouple Well Hole Connections When the Solids Cell Holder P/N GS20600 is to be used in the Electrical Heating Jacket P/N GS20730, a connection must be made to the temperature controlling thermocouple assembly of the Electrical Heating Jacket.
- Page 12 User Manual 4. Legend of Bubble Part Numbers For Solids Cell Holder P/N GS20600 1) Retaining ring. 2) Body. 3) Pressure plate. 4) Alignment pin. 9) Thermocouple well hole. For Solids Cell Holder P/N GS20610 5) Location plate. 6) Pressure plate.
- Page 14 Notes for Usage of GS20600 or GS20610...
- Page 15 Systems Engineering Inc. -Tokyo Fax: 215 793 4011 Tel: 03 3946 4993 Fax: 03 3946 4983 United Kingdom email:systems-eng@systems-eng.co.jp Specac Ltd. - London Website: www.systems-eng.co.jp Unit 12, Science & Innovation Centre Halo Business Park Spain Orpington Teknokroma S.Coop C. Ltda...
- Page 16 Brilliant Spectroscopy™ www.specac.com SPECAC INC. SPECAC LTD. 414 Commerce Drive Unit 12, Science & Innovation Centre Suite 175, Halo Business Park Fort Washington, Orpington PA 19034, USA Kent BR5 3FQ Tel: 215 793 4044 Tel: +44 (0) 1689 873134 Fax: 215 793 4011...
Need help?
Do you have a question about the GS20600 and is the answer not in the manual?
Questions and answers