Related Manuals for Specac GS12000 Series
Summary of Contents for Specac GS12000 Series
- Page 1 Polarizer Rotator 3” x 2” Slide Mount For Benchmark®/GS12000 Series Polarizers User Manual 2I-12500-6...
- Page 3 Polarizer Rotator 3” x 2” Slide Mount For Benchmark®/GS12000 Series Polarizers User Manual 2I-12500-6...
- Page 4 ......11 EGEND UBBLE UMBER DENTIFICATION 5. S ................11 PARE ARTS © May 2018 Specac Ltd. All rights reserved. Brilliant Spectroscopy is a trademark of Specac Ltd. Other product names mentioned herein may be trademarks of their respective owners.
- Page 5 GS12000 Series polarizer as fitted. This user manual will instruct how to place a GS12000 Series polarizer into and for use of the polarizer rotator 3” x 2” slide mount. For any GS12000 Series polarizer that is to be used, please consult the polarizers own user instruction manual.
-
Page 6: Unpacking And Checklist
2. Unpacking and Checklist The polarizer rotator 3” x 2” slide mount P/N GS12500 can be supplied on its own or together with a dedicated GS12000 Series polarizer, if both these items have been ordered as a Benchmark® Polarizer Kit via P/N’s GS12501, GS12502, GS12503, GS12504 or GS12505. - Page 7 In operation, as shown from the front side view (Fig 1.), a GS12000 Series polarizer is placed into the aperture opening (2) using the spring clip ring mount of the GS12000 Series polarizer to obtain a tight, secure fit. Once the polarizer has been correctly positioned into the...
- Page 8 3” x 2” slide mount (1) using the groove slots (5), the angle viewing window (4) will be obscured from reading a specific angle that may be set on the GS12000 Series polarizer itself. However, there is an additional marked notch (6) on the side of the rotator mount (1) that can be used to align to any of the angle marks on the graduated wheel (3) for reading if required.
- Page 9 Fitting a GS12000 Series Polarizer into the Polarizer Rotator 3” x 2” Slide Mount P/N GS12500 As shown at Fig 3. and Fig 4. please see how a GS12000 Series polarizer is fitted into the polarizer rotator 3” x 2” slide mount (1).
- Page 10 (1) and to prevent any damage to the polarizer grid. To mount the GS12000 Series polarizer firmly into the aperture port (2), the metal tab on the spring clip ring mount of the polarizer may need to be bent slightly outwards, away from the centre of the polarizer.
- Page 11 Polarizer Rotator 3” x 2” Slide Mount For GS12000 Series Polarizers MOUNT PART ONLY – into the aperture port (4) until it engages and is a nice tight fit. If it is a loose fit, adjust the tension by bending the metal tab accordingly.
- Page 12 • Always store the polarizer in its original packing container when not being used. If a Benchmark® Polarizer Kit was supplied, the GS12000 Series polarizer may be kept fitted into the rotator 3” x 2” slide mount (1) and the whole assembly of parts can be stored in the...
-
Page 13: Spare Parts
Polarizer Rotator 3” x 2” Slide Mount For GS12000 Series Polarizers 4. Legend – Bubble Number Part Identification (1) Polarizer rotator 3” x 2” slide mount. (2) Aperture to mount a GS12000 Series polarizer. (3) Rotatable, graduated wheel to rotate the polarizer. - Page 14 User Manual Notes for GS12000 Series Polarizer Use...
- Page 15 Tel: 215 793 4044 Systems Engineering Inc. -Tokyo Fax: 215 793 4011 Tel: 03 3946 4993 Fax: 03 3946 4983 United Kingdom email:systems-eng@systems-eng.co.jp Specac Ltd. - London Website: www.systems-eng.co.jp River House, 97 Cray Avenue, Orpington Spain Kent BR5 4HE Teknokroma S.Coop C. Ltda...
- Page 16 Brilliant Spectroscopy™ www.specac.com SPECAC INC. SPECAC LTD. 414 Commerce Drive River House, 97 Cray Avenue, Suite 175, Orpington Fort Washington, Kent BR5 4HE PA 19034, USA Tel: +44 (0) 1689 873134 Tel: 215 793 4044 Fax: +44 (0) 1689 878527 Fax: 215 793 4011 Registered No.
Need help?
Do you have a question about the GS12000 Series and is the answer not in the manual?
Questions and answers