View A Camera; Add A Camera; Remove A Camera; Power Saving Mode - Motorola PIP1510 CONNECT User Manual

Note
You cannot select this option if there is only one registered camera in the
parent unit.
If a baby (camera) unit is currently paired with the parent unit, * will appear
next to the camera number (*1 / 2 / 3 / 4).
3.6.3

View a camera

Press MENU on the parent unit. The status bar pops up.
1.
2. Scroll the navigation button to select
3. Scroll the navigation button to select
4. Scroll the navigation button to select a desired camera (1 / 2 / 3 / 4) to
view the picture from that camera, then press OK. The selected camera
/ / /
3.6.4

Add a camera

1. Press MENU on the parent unit. The status bar pops up.
2. Scroll the navigation button to select
3. Scroll the navigation button to select
4. Scroll the navigation button to select a desired camera (1 / 2 / 3 / 4) to
add it to registration, then press OK to confirm.
3.6.5

Remove a camera

Press MENU on the parent unit. The status bar pops up.
1.
2. Scroll the navigation button to select
3. Scroll the navigation button to select
will pop up.
4. Scroll the navigation button to select a desired camera (1 / 2 / 3 / 4) to
remove it from registration, then press OK to confirm.
Note
You cannot remove the camera if it is the only registered camera in the parent
unit.
3.7

Power saving mode

1. Press MENU on the parent unit. The status bar pops up.
2. Scroll the navigation button to select
3. Scroll the navigation button to select a screen off time:
60 mins.
or
4. The screen will be off after the time limit is reached.
5. Press any button on the parent unit to wake it up.
Note
You can still hear the audio when the screen is off.
16
will appear on the screen.
.
, then press OK.
.
, then press OK.
.
, then press OK and 1 / 2 / 3 / 4
.
Using the video baby monitor
, 5 mins, 30 mins