Table of Contents
Advertisement
v Limit your movements; this helps prevent static electricity building up around you.
v Prevent others from touching the card or other components.
v Before removing the card from the anti-static bag, touch the bag to an unpainted metal surface on
your computer and hold it there for at least two seconds.
v Handle the card by its edges only. Do not touch exposed circuitry and components.
7. Remove the PCI-X cryptographic coprocessor from its static-protective bag.
8. Verify that the jumpers on the card are positioned correctly; see Table 2 on page 5.
J7
BT1
J9
J8
J10
Eth
net
R
S
BT2
2
3
2
Figure 1. Jumpers on the PCI-X cryptographic coprocessor (front side)
4
4764 PCI-X Cryptographic Coprocessor Installation Manual
Secure Crypto Module
Front Side
Advertisement
Table of Contents
