Preventing Tones From Changing During; Performance (Lock Function); Playing Along With A Portable Audio Player; Playing Along With An Audio File From Usb Memory - Roland Lucina AX-09 Owner's Manual

Display Value
C7 1
CC71 ( RESONANCE)
CC72
C7 2
( RELEASE TIME)
CC73
C7 3
( ATTACK TIME)
C7 4
CC74 ( CUTOFF)
AF t
AFTERTOUCH
PU P
PEDAL UP
PD n
PEDAL DOWN
MEMO
With the factory settings, the foot pedal is assigned to
C6 4
(Hold) .
If using a foot pedal not made by Roland
If you're using a foot pedal that was made by a
manufacturer other than Roland, the pedal polarity might
be reversed, so that the operations that occur when you
press and release the pedal are the opposite of what you
expect . If so, hold down the [SHIFT] button and press the
[V-LINK] button three times to make the display indicate
" . " Then use the [INC/+] / [DEC/–] buttons to make the
Po L
display indicate "
rEu
To save this setting, hold down the [SHIFT] button and
press the [WRITE] button .
Value
Std
.(Standard)
rEu
.(Reverse)
Preventing Tones from Changing
During Performance ( Lock function)
You can lock the tone selected on the Lucina AX-09 to
prevent a diff erent sound from being selected even if you
accidentally press a tone button while performing .
1. Hold.down.the.. [ LOCK].button.until.it.lights .
The Lock function will turn on; in this state, button
operations will not switch the tone .
To re-enable tone switching, hold down the button once
again until [LOCK] button goes out .
14
Explanation
Control the resonance . Increasing
the resonance value will produce
a distinctive tonal character that is
typical of a synthesizer .
Control the time from note-off (when
the key is released) until the sound is
no longer heard (i .e ., the release time) .
Control the sharpness (attack speed)
with which the sound begins .
Control the cutoff . Higher values will
make the sound harder (brighter);
lower values will make the sound
softer (more mellow) .
Apply the most suitable eff ect for each
of the Lucina AX-09's tones .
Select the tone of the next tone
number .
Select the tone of the preceding tone
number .
. "
Explanation
Pedals made by Roland
Pedals with a polarity opposite to that
of Roland pedals
Playing Along with a Portable
Audio Player
You can connect your portable audio player, and play the
Lucina AX-09 along with your favorite songs .
1. Connect.your.portable.audio.player.to.the.Lucina.
AX-09's.. E XT.IN.jack .
Use a stereo mini-plug
(1/8") cable to connect
your player to the EXT
IN jack .
2. Play.back.a.song.on.your.portable.audio.player,.
and.play.along.on.the.Lucina.AX-09 .
Use the controls of your player to adjust the volume and
select songs .
* When.connection.cables.with.resistors.are.used,.the.
volume.level.of.equipment.connected.to.the.inputs.(EXT.
IN).may.be.low ..If.this.happens,.use.connection.cables.
that.do.not.contain.resistors .
Playing Along with an Audio
File from USB Memory
The Lucina AX-09 can play back audio
fi les (MP3, WAV, AIFF) that you've copied
to USB memory from your computer,
allowing you to play along with your
favorite songs .
Copying audio les from your
computer to USB memory
You'll need to copy the audio fi les from your computer to
the root level of your USB memory .
Copy.to.a.USB.drive
MP3, WAV, AIFF