Operating Instructions; Initial Start-Up - Holland Green Science Aether Series User Manual

IX. Operating Instructions
Note: High Temperature Hazard - Do NOT touch the pump surface!
The surface of the pump becomes very hot during operation.
9.1

Initial Start-Up

Ensure the gas flow at the exhaust port is not blocked or restricted in any way.
Do NOT start the pump if the exhaust port is blocked.
Excessive or insufficient oil will decrease pump performance or even cause
malfunction. The pump must always be stopped prior to adding oil.
The oil level must be maintained between the position of MAX and MIN of the oil
sight glass
Version 1.0
User Manual
20