1. Manuals
  2. Brands
  3. Christie Manuals
  4. Lighting Equipment
  5. CA20-AC
  6. Installation and setup manual

Christie CounterAct CA20-AC Installation And Setup Manual

Hide thumbs Also See for CounterAct CA20-AC:
Table of Contents

Advertisement

Quick Links

Download this manual
Installation and Setup Guide
020-103456-02
CounterAct

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the CounterAct CA20-AC and is the answer not in the manual?

Questions and answers

Related Manuals for Christie CounterAct CA20-AC

Summary of Contents for Christie CounterAct CA20-AC

  • Page 1 Installation and Setup Guide 020-103456-02 CounterAct...
  • Page 2 Software solely for backup or archival purposes. Unauthorized copying or distribution of the Software is expressly prohibited unless agreed to in writing by Christie. Licensee must reproduce and include the copyright notice on any backup copy of the Software. Licensee may not remove or alter any proprietary rights or copyright notice or identification which indicates the ownership of the Software.
  • Page 3 Agreement, without affecting any other provision of this Agreement. No waiver by Christie of any particular default or omission committed by Licensee will affect or impair the right of Christie in respect of any subsequent default or omission of the same or a different kind. No delay or failure by Christie to exercise any rights in connection with any default or omission committed by Licensee will affect or impair Christie's rights in respect of that particular default or omission or any subsequent default or omission of the same or different kind.

  • Page 4: Table Of Contents

    Removing the metal casing..........26 CounterAct Installation and Setup Guide 020-103456-02 Rev. 1 (12-2021) Copyright © 2021 Christie Digital Systems USA, Inc. All rights reserved.
  • Page 5 Radio frequency (RF) wireless communication....... . . 51 CounterAct Installation and Setup Guide 020-103456-02 Rev. 1 (12-2021) Copyright © 2021 Christie Digital Systems USA, Inc. All rights reserved.

  • Page 6: Introduction

    CounterAct CA20-AU • CounterAct CA20-D Product documentation For installation, setup, and user information, see the product documentation available on the Christie website. Read all instructions before using this product. 1. Access the documentation from the Christie website: • Go to this URL: https://bit.ly/3nuRiMG or https://www.christiedigital.com/products/uvc-disinfection/counteract/.

  • Page 7: Important Safeguards

    This product must be operated in an environment that meets the operating range specification. Use only the attachments and/or accessories recommended by Christie. Use of others may result in the risk of fire, shock, excessive UV exposure, or personal injury.

  • Page 8: Patented Care222 Uv Lamp Safety Precautions

    PERSONAL INJURY HAZARD! Eye damage may result from directly viewing the light produced by the lamp in this product. Always turn off the lamp before performing maintenance or service. CounterAct Installation and Setup Guide 020-103456-02 Rev. 1 (12-2021) Copyright © 2021 Christie Digital Systems USA, Inc. All rights reserved.

  • Page 9: Service And Maintenance Guidelines

    Do not drop, hit, use force, or scratch the lamp module. • Do not disassemble or modify the lamp module. • Use only mercury-free, excimer lamps (UXFL70-222B4-UIA) sold by Christie (P/N: 174-006107- XX/003-121997-XX). Service and maintenance guidelines Read all safety and warning guidelines before maintaining or servicing the device.

  • Page 10: Product Labels

    Learn about the labels that may be used on the product. Labels on your product may be yellow or black and white. General hazards Hazard warnings also apply to accessories once they are installed in a Christie product that is connected to power. Fire and Shock Hazard To prevent fire or shock hazards, do not expose this product to rain or moisture.
  • Page 11 Once the lamp is integrated into CounterAct and installed according to this guide, CounterAct performs according to Risk Group Exempt levels. CounterAct Installation and Setup Guide 020-103456-02 Rev. 1 (12-2021) Copyright © 2021 Christie Digital Systems USA, Inc. All rights reserved.

  • Page 12: Counteract Overview

    • Three-finger hold design for single-handed service • Flexible power input options • LED status indicator Technical support Technical support for Christie Cinema products is available at: • Support.cinema@christiedigital.com • +1-877-334-4267 • Christie Professional Services: +1-800-550-3061 or NOC@christiedigital.com Technical support for Christie Enterprise products is available at: •...
  • Page 13 Introduction • South Korea: +82 2 702 1601 or tech-Korea@christiedigital.com • Christie Professional Services: +1-800-550-3061 or NOC@christiedigital.com CounterAct Installation and Setup Guide 020-103456-02 Rev. 1 (12-2021) Copyright © 2021 Christie Digital Systems USA, Inc. All rights reserved.

  • Page 14: Installation And Setup

    Maximum power draw Input 1: 45 W Input 2: 45 W AC input—CE version Rated voltage 220-240 VAC, single-phase Frequency 50/60 Hz CounterAct Installation and Setup Guide 020-103456-02 Rev. 1 (12-2021) Copyright © 2021 Christie Digital Systems USA, Inc. All rights reserved.

  • Page 15: Tools And Components Required

    The IEC receiver box assists with setup prior to installing the unit in the ceiling, bench top testings, and troubleshooting. Use only the attachments and/or accessories recommended by Christie. Use of others may result in the risk of fire, shock, excessive UV exposure, or personal injury.

  • Page 16: Tablet Recommendations For Counteract Configure

    Emits far-UVC 222nm light to reduce pathogens. Locking/unlocking indicator Indicates the locking and unlocking rotation direction for the disinfecting module. Multi-function button Provides three functions: CounterAct Installation and Setup Guide 020-103456-02 Rev. 1 (12-2021) Copyright © 2021 Christie Digital Systems USA, Inc. All rights reserved.

  • Page 17: Inserting The Disinfecting Module In The Receiver Box

    2. Hold the disinfecting module and turn the disinfecting module clockwise to engage. Lock Align line Start line Lock line Unlock CounterAct Installation and Setup Guide 020-103456-02 Rev. 1 (12-2021) Copyright © 2021 Christie Digital Systems USA, Inc. All rights reserved.

  • Page 18: Removing The Disinfecting Module From The Receiver Box

    1. Disable power to the system. 2. Insert the magnetic driver in the locking hole and turn the locking pin counterclockwise to release it. CounterAct Installation and Setup Guide 020-103456-02 Rev. 1 (12-2021) Copyright © 2021 Christie Digital Systems USA, Inc. All rights reserved.
  • Page 19 4. Remove the disinfecting module from the receiver box by pulling the module straight down (assuming the receiver box is mounted flush with the ceiling). CounterAct Installation and Setup Guide 020-103456-02 Rev. 1 (12-2021) Copyright © 2021 Christie Digital Systems USA, Inc. All rights reserved.

  • Page 20: Workflow: Installing And Setting Up Counteract

    Mount the receiver boxes in the ceiling and install the disinfecting modules in the receiver boxes (on page 27). CounterAct Installation and Setup Guide 020-103456-02 Rev. 1 (12-2021) Copyright © 2021 Christie Digital Systems USA, Inc. All rights reserved.

  • Page 21: Planning The Layout And Power Of The Site

    Installed in a ceiling with a minimum height of 8.5 m (28 feet)—Dual-lamp mode Below 6.7 m (22 feet) this model of the fixture should not be used. Contact Christie Sales for options suitable for installation in ceilings below 6.7 m (22 feet).

  • Page 22: Setting The Lamp Mode

    To ensure safety redundant circuitry exists, CounterAct has two lamp mode switches. The following image shows the position of the switches (on the reverse side of the Care222 label). CounterAct Installation and Setup Guide 020-103456-02 Rev. 1 (12-2021) Copyright © 2021 Christie Digital Systems USA, Inc. All rights reserved.

  • Page 23: Installing Counteract Configure

    Logging into CounterAct Configure Log into the CounterAct Configure application to manage the room and fixtures. 1. Open the CounterAct Configure application. CounterAct Installation and Setup Guide 020-103456-02 Rev. 1 (12-2021) Copyright © 2021 Christie Digital Systems USA, Inc. All rights reserved.

  • Page 24: Logging Off The Counteract Configure Application

    CounterAct requires a permanent AC connection to operate. The following illustrates the wiring connections required for AC inputs. AC input Live/Line CounterAct Installation and Setup Guide 020-103456-02 Rev. 1 (12-2021) Copyright © 2021 Christie Digital Systems USA, Inc. All rights reserved.
  • Page 25 6. Put the bare ends of the wires into the terminals of the socket. 7. Tighten the three terminal screws. CounterAct Installation and Setup Guide 020-103456-02 Rev. 1 (12-2021) Copyright © 2021 Christie Digital Systems USA, Inc. All rights reserved.

  • Page 26: Removing The Metal Casing

    The metal casing must be taken off for pendant and ceiling surface mounting. 1. Remove the disinfecting module from the receiver box. 2. Loosen the four captive screws. CounterAct Installation and Setup Guide 020-103456-02 Rev. 1 (12-2021) Copyright © 2021 Christie Digital Systems USA, Inc. All rights reserved.

  • Page 27: Mounting Options

    Christie equipment provider • Inclination: ±30° • Rotation: 180° around the vertical axis • Static load: 6 kg (13.2 lbs) CounterAct Installation and Setup Guide 020-103456-02 Rev. 1 (12-2021) Copyright © 2021 Christie Digital Systems USA, Inc. All rights reserved.

  • Page 28: Mounting Requirements

    Ensure load wires are connected between the receiver box, mounting structure, and the load bearing surface (higher than the tile) according to local building regulations and codes. Recommended torque for screws Christie recommends the following torque for screws when mounting CounterAct. Size Torque Nm Torque in-lbs.
  • Page 29 8. Remove the metal casing from the receiver box before installing it (on page 26). 9. Lift up the receiver box close to the crossbar and position it with the center hole. CounterAct Installation and Setup Guide 020-103456-02 Rev. 1 (12-2021) Copyright © 2021 Christie Digital Systems USA, Inc. All rights reserved.
  • Page 30 First dowel hole — M4 captive screws 11. Holding the receiver box, tighten the four captive screws in the receiver box. CounterAct Installation and Setup Guide 020-103456-02 Rev. 1 (12-2021) Copyright © 2021 Christie Digital Systems USA, Inc. All rights reserved.

  • Page 31: Mounting Receiver Boxes Recessed In The Ceiling With A Block And Hanger

    20’ T-grid span vertical adjustable 512A(512ATC) 24’ T-grid span vertical adjustable 1. Ensure the power is turned off at the source. CounterAct Installation and Setup Guide 020-103456-02 Rev. 1 (12-2021) Copyright © 2021 Christie Digital Systems USA, Inc. All rights reserved.
  • Page 32 5. Using two M4 screws, attach the rotation plate to the top of the receiver box. 6. Loosen the two screws by several turns (approximately five turns) to allow the plate to be rotated smoothly. CounterAct Installation and Setup Guide 020-103456-02 Rev. 1 (12-2021) Copyright © 2021 Christie Digital Systems USA, Inc. All rights reserved.
  • Page 33 Quantity M3 screws Default align mark 12. Connect the safety cables between the receiver box and the bracket as required. CounterAct Installation and Setup Guide 020-103456-02 Rev. 1 (12-2021) Copyright © 2021 Christie Digital Systems USA, Inc. All rights reserved.
  • Page 34 Rom side 15. Rotate the receiver box in a clockwise directions until it reaches the end of the two short slots. CounterAct Installation and Setup Guide 020-103456-02 Rev. 1 (12-2021) Copyright © 2021 Christie Digital Systems USA, Inc. All rights reserved.

  • Page 35: Mounting Receiver Boxes With The Pendant Option

    Mounting receiver boxes with the pendant option Pendant mounting works with swing bracket (P/N: 174-105107-XX) or an equivalent mounting fixture. This is an optional mounting option available for purchase from a Christie equipment provider. CounterAct Installation and Setup Guide 020-103456-02 Rev. 1 (12-2021) Copyright ©...
  • Page 36 5. Place the receiver box onto the bottom bracket. 6. Tighten the two screws installed in step 4 and install two more M4 screws (A in image below). CounterAct Installation and Setup Guide 020-103456-02 Rev. 1 (12-2021) Copyright © 2021 Christie Digital Systems USA, Inc. All rights reserved.
  • Page 37 10. Install two self-drilling screws (A in the image below) from the side through the 4.5 mm (0.18 inches) diameter hole. CounterAct Installation and Setup Guide 020-103456-02 Rev. 1 (12-2021) Copyright © 2021 Christie Digital Systems USA, Inc. All rights reserved.
  • Page 38 (B in the image below) leaving them loosely fastened. Description Quantity Hole for safety cable M4 Tamper-proof torx screw Bottom bracket Receiver box CounterAct Installation and Setup Guide 020-103456-02 Rev. 1 (12-2021) Copyright © 2021 Christie Digital Systems USA, Inc. All rights reserved.

  • Page 39: Powering On The Counteract Fixture

    CounterAct can be run in either Schedule or Manual on mode. Note the following when the fixture is in Schedule mode: • It follows any enabled schedules. CounterAct Installation and Setup Guide 020-103456-02 Rev. 1 (12-2021) Copyright © 2021 Christie Digital Systems USA, Inc. All rights reserved.

  • Page 40: Setting Up Fixtures In Counteract Configure

    Adding fixtures to a room Fixtures must be added to a room in CounterAct Configure. Access level: Admin and Installer CounterAct Installation and Setup Guide 020-103456-02 Rev. 1 (12-2021) Copyright © 2021 Christie Digital Systems USA, Inc. All rights reserved.
  • Page 41 Installation and setup The LEDs on the CounterAct of any fixtures not added slowly flash red. Christie recommends only powering on the fixtures in the room being configured to avoid confusion if the controller detects unpaired fixtures in adjacent rooms.

  • Page 42: Registering Counteract

    Installation and setup Once a fixture is added, you can rename it (on page 42). Christie recommends selecting a new name to indicate the position information of the fixture in the room for ease of identification. If the adding fixture process is interrupted, such as closing CounterAct Configure or a crash, CounterAct resets the Bluetooth module after 180 seconds if the pairing process is not completed within the 180 seconds.

  • Page 43: Creating A Schedule

    Installation and setup 8. If you proceeded automatically and the tablet is connected to the internet, CounterAct Configure contacts Christie and registers the fixtures with the site from step 5. The fixtures are registered and no further action is required.
  • Page 44 4. Provide a copy of the System and Design Installation Verification Checklist (P/N:020-103558- XX) to the client and retain a copy for your records. CounterAct Installation and Setup Guide 020-103456-02 Rev. 1 (12-2021) Copyright © 2021 Christie Digital Systems USA, Inc. All rights reserved.

  • Page 45: Maintenance And Service

    • Do not disassemble or modify the lamp module. • Use only mercury-free, excimer lamps (UXFL70-222B4-UIA) sold by Christie (P/N: 174-006107- XX/003-121997-XX). Outside of lamp replacements, this product is not serviceable in the field and must be sent back to Christie if servicing is required.
  • Page 46 5. Remove the assembly from the bottom cover. 6. Remove the two M3 screws holding the lamp assembly in place. CounterAct Installation and Setup Guide 020-103456-02 Rev. 1 (12-2021) Copyright © 2021 Christie Digital Systems USA, Inc. All rights reserved.
  • Page 47 Position the new lamp in place on the disinfecting module. d) Secure the lamp using the two screws removed in step 6. CounterAct Installation and Setup Guide 020-103456-02 Rev. 1 (12-2021) Copyright © 2021 Christie Digital Systems USA, Inc. All rights reserved.

  • Page 48: Replacing A Fixture

    Note the ID/name of the fixture not connected to the network as this is the fixture you removed. Only one fixture should be listed. 5. Select Add fixture (+). CounterAct Installation and Setup Guide 020-103456-02 Rev. 1 (12-2021) Copyright © 2021 Christie Digital Systems USA, Inc. All rights reserved.
  • Page 49 11. If using schedules in the room, select Activate Schedule. 12. Verify you see a clock symbol on all the fixtures in the room. CounterAct Installation and Setup Guide 020-103456-02 Rev. 1 (12-2021) Copyright © 2021 Christie Digital Systems USA, Inc. All rights reserved.

  • Page 50: Regulatory

    (01/2016) on the control of pollution caused by electronic information products, hazardous substances concentration limits (GB/T 26572 - 2011), and the applicable product marking requirement (SJ/T 11364 - 2014). CounterAct Installation and Setup Guide 020-103456-02 Rev. 1 (12-2021) Copyright © 2021 Christie Digital Systems USA, Inc. All rights reserved.

  • Page 51: Radio Frequency (Rf) Wireless Communication

    Radio frequency (RF) wireless communication • EN 300 328 V2.2.2 (2019-07) • EN 301 489-1 V2.2.3 (2019-11) • EN 301 489-17 V3.2.4 (2020-09) CounterAct Installation and Setup Guide 020-103456-02 Rev. 1 (12-2021) Copyright © 2021 Christie Digital Systems USA, Inc. All rights reserved.

This manual is also suitable for:

Counteract ca20-auCounteract ca20-d

Table of Contents