Flash Unit Status; Changing The Flash Intensity Setting - Casio QV-R61 User Manual

BASIC IMAGE RECORDING

Flash Unit Status

You can find out the current flash unit status by pressing
the shutter button half way and checking the monitor
screen and red operation lamp.
The indicator is also
shown on the monitor
screen when the flash
unit is ready to fire.
* Red operation lamp
When the red operation
lamp is this:
Flashing
Lit
Red operation lamp *
It means this:
Flash unit is charging
Flash unit is ready to fire

Changing the Flash Intensity Setting

Perform the following steps to change the flash intensity
setting.
1.
In the REC mode, press [MENU].
2.
Use [ ] and [ ] to select the "REC" tab.
3.
Use [ ] and [ ] to select "Flash Intensity",
and then press [ ].
4.
Use [ ] and [ ] to select the setting you
want, and then press [SET].
To make flash intensity:
Stronger
Normal
Weaker
IMPORTANT!
• Flash intensity may not change if the subject is too
far or too close to the camera.
65
Select this setting:
+2
+1
0
–1
–2