Table of Contents
Advertisement
OTHER RECORDING FUNCTIONS
REC Mode Camera Settings
The following are the settings you can make before
recording an image using a REC mode.
• ISO sensitivity
• Grid on/off
• Metering
• Image Review on/off
• Color filtering
• L/R key setting
• Saturation
• Power on default settings
• Contrast
• Resetting the camera
• Sharpness
NOTE
• You can also configure the settings listed below. See
the referenced pages for more information.
— Size and Quality (page 63)
— White Balance (page 73)
— Flash Intensity (page 60)
— Digital Zoom (page 57)
— AF Area (page 67)
Specifying ISO Sensitivity
Use the following procedure to select the ISO sensitivity
setting that suits the type of image you are recording.
1.
In the REC mode, press [MENU].
2.
Select the "REC" tab, select "ISO", and then
press [ ].
3.
Use [ ] and [ ] to select the setting you
want, and then press [SET].
• QV-R51
To get this:
Conforms to ISO 50
Conforms to ISO 100
Conforms to ISO 200
Conforms to ISO 400
Automatic sensitivity selection
• QV-R41
To get this:
Conforms to ISO 64
Conforms to ISO 125
Conforms to ISO 250
Conforms to ISO 500
Automatic sensitivity selection
IMPORTANT!
• Increasing ISO sensitivity can cause static to appear
inside an image. Select the ISO sensitivity setting
that suits your shooting needs.
• Using a high ISO sensitivity setting along with the
flash to shoot a nearby subject may result in
improper illumination of the subject.
86
Select this setting:
ISO 50
ISO 100
ISO 200
ISO 400
Auto
Select this setting:
ISO 64
ISO 125
ISO 250
ISO 500
Auto
Advertisement
Table of Contents
