Formatting Built-In Memory - Casio QV-R41 User Manual

OTHER SETTINGS

Formatting Built-in Memory

Formatting built-in memory deletes any data stored in it.
IMPORTANT!
• Note that data deleted by a format operation cannot
be recovered. Check to make sure you do not need
any of the data in memory before you format it.
• Formatting built-in memory deletes all files, including
files in the FAVORITE folder (page 118), protected
files (page 111), BESTSHOT user setups (page 77),
the startup image (page 124), and the power down
image (page 125).
1.
Check to make sure there is no memory card
loaded in the camera.
• If there is a memory card loaded in the camera,
remove it (page 138).
2.
In the REC mode or the PLAY mode, press
[MENU].
3.
Select the "Set Up" tab, select "Format", and
then press [ ].
4.
Use [ ] and [ ] to select "Format", and then
press [SET].
• To exit the format operation without formatting,
select "Cancel".
135