Table of Contents
Advertisement
OTHER SETTINGS
Configuring [
] (REC) and [
Buttons Power On/Off Functions
You can use the following procedures to configure the [
(REC) and [
] (PLAY) buttons so power turns and/or off
whenever they are pressed.
1.
In the REC mode or the PLAY mode, press
[MENU].
2.
Select the "Set Up" tab, select "REC/PLAY",
and then press [ ].
3.
Use [ ] and [ ] to select the setting you
want, and then press [SET].
To configure this operation:
Power turns on when [
[
] (PLAY) is pressed (but does not
turn off)
Power turns on or off when [
(REC) is pressed in the REC mode
or [
] (PLAY) is pressed in the
PLAY mode
Power does not turn on or off when
[
] (REC) or [
] (PLAY) is
pressed
] (PLAY)
Select this setting:
] (REC) or
Power On
]
Power On/Off
Disable
IMPORTANT!
• When "Power On/Off" is selected, pressing [
(REC) in the REC mode or [
]
mode turns off the camera.
• Pressing [
the REC mode, and pressing [
REC mode switches to the PLAY mode.
NOTE
• The initial default setting is "Power On".
134
] (PLAY) in the PLAY
] (REC) in the PLAY mode switches to
] (PLAY) in the
]
Advertisement
Table of Contents
